Search results

  1. L

    Oil Cooler Lines Replacement Recommendations?

    I took mine to a hydralic hose place here locally, and they refitted and crimped new hoses to the aluminum connectors. Said the existing crimp wasnt very good. Cost like 40 bucks.
  2. L

    Wing and splitter installed photos and some evolution of my car.

    Fit is pretty good, it comes only with 2 of the front frame holes drilled. I took off the old cover over layed it marked it and drilled. The interfenders holes arent drilled either, so you after you get the four frame holes drilled you put them and place centered and drill and screw them. For...
  3. L

    Wing and splitter installed photos and some evolution of my car.

    I did, MCS Suspension, 500 front springs, 1000 rear.
  4. L

    Wing and splitter installed photos and some evolution of my car.

    Thanks Mark, i wish you could also, so i could ride in my car with you..lol To bad your half a country away.
  5. L

    Wing and splitter installed photos and some evolution of my car.

    The wing and splitter are from Vipair
  6. L

    Vipair splitter and wing

    Ive got to say these products seem top notch, just like steve. Steve has been great to deal with answered tons of questions, and is very knowledgeable. I seem to forget what time zone he is in most of the time and call in the morning here, always answers, and possibly once called me back in 5...
  7. L

    Wing and splitter installed photos and some evolution of my car.

    A friend of mine made them. PM your address and ill send you some. The dodge is in graphite, to match our stripes :)
  8. L

    Wing and splitter installed photos and some evolution of my car.

    Started Here.
  9. L

    Idle Problem

    You know it was kinda a slow crank over the other day.
  10. L

    Idle Problem

    2008 Coupe, Mopar PCM, Corsa Exhaust. When car is up to temp and just sitting, the rpms drop to about 500 then back up, over and over, if i touch the gas pedal and bring it down slowly it will idle normal. No check engine lights, or codes???
  11. L

    Keep the ACR or buy a ACR X

    Seems like a good point gbatejan. I guess everything is fine, just no power braking for a short time. MB if your pedal was dropping, that is more scary, maybe boiled fluid, over heated, small amount of air? What type of fluid you running? I use castrol srf and have never got a soft pedal yet. I...
  12. L

    Keep the ACR or buy a ACR X

    Mine is exactly the same way dont feel like anti lock but its from a the hardest braking zone. Very hard pedel then if you kinda repress it goes to normal. Maybe a new thread on this as we are hi jacking mp's thread.
  13. L

    Keep the ACR or buy a ACR X

    I did a vacuum check on the brake booster, and the check valve, both are fine i went ahead and ordered a new vacuum line, and check valve, they was under 30 dollars shipped. Tom sessions also says if the anti locks brakes dont finish there cycle or you let off once you kick them in it takes a...
  14. L

    Keep the ACR or buy a ACR X

    My confidence actually went down, for a lil bit. I decided to go out in the rain on the cups for a few laps and spun off track backwards in turn 10. No lift no throttle the ass end just slowly came around. Got the car parrell to the wall and, Missed the tire wall by about 5 ft. No damage just...
  15. L

    Keep the ACR or buy a ACR X

    Rain Saturday morning but the track was dry by 11.00. Sunday was sunny and cool. I had a great time. A load of track time. There was a few vipers there 5 in total. 2 Comp Coupes, 2 ACR's and mine. , Stuart "red fang" was full of great info, and very helpfull, thanks. Jim stout and his wife are...
  16. L

    ACR rear wing

    Ive recently orders splitter and wing from vipair "steve" got the splitter installed seems to be a great piece. Wings is being ship out this week i hope. Ill get some photos up when everything is installed. I think steve is just getting a new shipment of wings.
  17. L

    Garage / Shop floor covering question

    Not sure of stonhard, but the all out best would be a slurry quarts system. Stonhard may be just that, we use tnemec or general polymers for those. Same deal you hit it with a hammer and the concrete will break or come up first. Those start getting extremly expensive for a garage system also. If...
  18. L

    Garage / Shop floor covering question

    Im a union painting & drywall contractor, and we do good bit of commercial and industrial epoxy, aiphatic urethane, stamped, and acid etched floors. We use sherwin williams, tennant, hp spartacote to name a few. There are plenty of good manufactures of coatings, but as someone said above the...
  19. L

    Oil on Spark Plug Threads

    Cam I would agree, looks more like a wicking of oil. Im sure it is blow by if i had to guess. PCV used to put quite a bit of oil in the intake. Ive put a catch can on since to collect it. The oil is more of a darker sludge residue. I guess short of a compression test, or leak down I wont know...
  20. L

    sanity check

    You not the only one, in between putting parts on mine i spent 8 hrs last weekend doing paint correction. I to clean the underside, suspension components. Winter mods in the last few months ive done myself include MCS Suspension Stoptech rotors ACR Sidewinders MGW Shifter Polished Aluminum...
  21. L

    Oil on Spark Plug Threads

    Def. not antiseize, ill get some photos, dont seem to be a big deal. It is the tightest one on the car to get to. Maybe it wasnt torqued good by someone. I torqued them all back to 13 ft lbs. that what is stated.
  22. L

    Oil on Spark Plug Threads

    No oil standing as in valve cover leak or anything, it was more of a sludgey oil.
  23. L

    Oil on Spark Plug Threads

    2008 srt coupe, I was changing plugs today and the rear passenger side plug had some oil/on the threads of the spark plug. The ends of the plugs look as good as the others. Any suggestions?
  24. L

    Nitto NT05 "Mini-Review" - 2008 Roadster

    No Pilot Sport Cups
  25. L

    Nitto NT05 "Mini-Review" - 2008 Roadster

    My 345's seem to look a bit stretched even on the factory rim. Side wall leaning inward. How much more does this effect take place on a 335?

Latest posts

Members online

Total: 917 (members: 4, guests: 913)

Forum statistics

Threads
153,839
Posts
1,686,670
Members
18,448
Latest member
JpKL

Share this page

Top