Search results
-
Thump noise from neutral to first gear
I just lifted the rear of the car so both tires were off the ground. I turned one of the tires while the transmission was in 1st gear and the drive shaft will turn about a half inch each direction. So I think I may have one of two issues. 1) U-Joint straps or U-Joints on the Transmission side...- rhallman
- Post #2
- Forum: SRT10 and SRT10 Coupe Discussions
-
Paxton and Vibration
Feels like its coming from the engine. Didn't have the vibration until he Paxton was installed. I saw Dan Cragin is back, so I'll email him as well to see what I should check. Thanks.....- rhallman
- Post #5
- Forum: SRT10 and SRT10 Coupe Discussions
-
Paxton and Vibration
I had the mounts on for a few years with no issues before the paxton. Thanks..- rhallman
- Post #3
- Forum: SRT10 and SRT10 Coupe Discussions
-
Paxton and Vibration
I have had a slight vibration at around 2000-2400 RPM since having the Paxton installed. Ive read some other emails regarding a Damper. Is this the fix, or do I have another issue? Or is this nornal for a Paxton SC install? Thanks...Rich- rhallman
- Thread
- Replies: 6
- Forum: SRT10 and SRT10 Coupe Discussions
-
Thump noise from neutral to first gear
I started to hear a thump some times when I'm sitting at a light in neutral then shift to first with the clutch in. Thoughts on what it is? I just recently had a new rear installed with wavetrac insides. Maybe the installer didn't install u-joint bolts correctly? Thanks....Rich- rhallman
- Thread
- Replies: 1
- Forum: SRT10 and SRT10 Coupe Discussions
-
H-Spokes on 05 Commemorative Edition
I had the caps chromed as well on my wheels. Thanks...- rhallman
- Post #6
- Forum: SRT10 and SRT10 Coupe Discussions
-
H-Spokes on 05 Commemorative Edition
Here is a pic of my 05 vert with my new H-Spoke Chromed wheels. Thought it turned out well....even had the guys inlay the SRT logo on the wheels red. Pic is also before the new 08 CF Hood that is being shipped. Wheels done at CalChrome and those guys did a great job..! Pic of the wheel is...- rhallman
- Thread
- Replies: 8
- Forum: SRT10 and SRT10 Coupe Discussions
-
Oil everywhere....
Just bought 6 cans for GUNK HD Engine Degreaser at Oreilly. They were on sale buy one get one free. Can’t beat that. Have the new filter and will start pulling panels in the morning and cleaning. Fingers crossed this doesn’t happen again. Looking for an undercarriage steam cleaning place...- rhallman
- Post #14
- Forum: SRT10 and SRT10 Coupe Discussions
-
Oil everywhere....
Im using the VIPER filters...PT # 05037836AA.....But those I just ordered are now the "AB" version. Thanks...- rhallman
- Post #8
- Forum: SRT10 and SRT10 Coupe Discussions
-
Oil everywhere....
Well...changed the oil in my 2005 vert and all went as the past changes went. When installing the filter I normally tighen by hand then with a 1/4 turn with the filter wrench. This filter seemed like it took more turns to get it seated...but didnt think anything of it. Filled up with oil...- rhallman
- Thread
- Replies: 18
- Forum: SRT10 and SRT10 Coupe Discussions
-
Paxton and Oil Change?
What oil are you using with a paxton? Anyone using 50w ? Thanks.... Rich- rhallman
- Thread
- Replies: 3
- Forum: SRT10 and SRT10 Coupe Discussions
-
Color Codes for 2005 Commemorative Edition?
Thanks! I thought the Commemorative Edition was a different color white. I may have been wrong....and given bad info. Rich- rhallman
- Post #3
- Forum: SRT10 and SRT10 Coupe Discussions
-
Color Codes for 2005 Commemorative Edition?
Looking for the color codes for the white body color and the blue stripes. Thanks... Rich- rhallman
- Thread
- Replies: 7
- Forum: SRT10 and SRT10 Coupe Discussions
-
Filling water in Paxton SC? How and Where?
Ok...Thanks. Assuming just fill it till you see the water / antifreeze mix?- rhallman
- Post #3
- Forum: SRT10 and SRT10 Coupe Discussions
-
Filling water in Paxton SC? How and Where?
Iver looked at several documents on the web, but still a bit confused on where and how to fill the water levels in a Paxton NOVI 2000 SuperCharger? Also..How do I know when I need to add wather? I did find the mixture needs to be 25% Anti-freeze to 75% water. Thanks.. Rich- rhallman
- Thread
- Replies: 3
- Forum: SRT10 and SRT10 Coupe Discussions
-
How to install KW v2's - replacing stock shocks?
This is what I was looking for!! Thanks...!!- rhallman
- Post #9
- Forum: SRT10 and SRT10 Coupe Discussions
-
How to install KW v2's - replacing stock shocks?
KW's are installed but Im a bit confused on the adjustments? I looked at the manual for the KW v2's and wonder which adjustment does what? Which one is the Height Adjustment? Rebound or bump? Thanks...- rhallman
- Post #7
- Forum: SRT10 and SRT10 Coupe Discussions
-
How to install KW v2's - replacing stock shocks?
Before I jump in to replace my stock shocks, anyone have experiance and / or "How-To" tips on installing upgraded shocks? Thanks.... Rich- rhallman
- Thread
- Replies: 9
- Forum: SRT10 and SRT10 Coupe Discussions
-
New Gen V Pic at Auto Show
http://jalopnik.com/5899030/first-photo-of-new-srt-viper-at-new-york-auto-show- rhallman
- Thread
- Replies: 4
- Forum: Generation V Discussions / SRT Coupe, GTS, GTC, AC
-
Latest Teaser pic of Gen V off Facebook
Latest from DriveSRT.....- rhallman
- Post #35
- Forum: SRT10 and SRT10 Coupe Discussions
-
Latest Teaser pic of Gen V off Facebook
Sorry guys...that upload didnt work...- rhallman
- Post #12
- Forum: SRT10 and SRT10 Coupe Discussions
-
Latest Teaser pic of Gen V off Facebook
Here is a larger pic....- rhallman
- Post #11
- Forum: SRT10 and SRT10 Coupe Discussions
-
Latest Teaser pic of Gen V off Facebook
Looks like a passenger handle installed.....Can you say "Power"?- rhallman
- Thread
- Replies: 36
- Forum: SRT10 and SRT10 Coupe Discussions
-
KW V2 shock settings?
Im installing a set of KW V2's on my 2005 Vert this weekend. What settings are being used that give a lowered look and good ride? Thanks...- rhallman
- Thread
- Replies: 5
- Forum: SRT10 and SRT10 Coupe Discussions
-
Out of the garage and ready for the track
I think you have a "SuperCharged" emblem under SRT-10 on each side. Where did you buy those? Thanks...- rhallman
- Post #4
- Forum: SRT10 and SRT10 Coupe Discussions
