Search results

  1. rhallman

    Looking for OEM Vert soft top boot?

    I just sent you a PM....thanks..
  2. rhallman

    Looking for OEM Vert soft top boot?

    Looking for the OEM Convertable Soft Top Boot. Mopar Part # WX03DX9AA Thanks...Rich
  3. rhallman

    Check Engine Light P0141 and P0161 Faults

    Finally installed the new o2 sensor this weekend. Drove it for 110 miles so the obd2 monitors would reset. Got home....plugged in the obd2 tester and all faults were cleared and a green light for emissions. Agree...there is a special way to install these sensors on a Belanger, but once you...
  4. rhallman

    O2 bung thread size?

    Got a m18 x 1.5 tap from napa....fixed the cross threading and installed the new o2 sensor. No problems. Just don't get the thread chaser. Didn't work for me. If your threads are really messed up, you need to use a tap. The thread chaser I got even said not for tapping...they were right...
  5. rhallman

    O2 bung thread size?

    I need to tap out the bung on my Belanger downstream o2 location. Finding different thread sizes online. Anyone know for sure the thread size of the o2 on the Belanger? Thanks...
  6. rhallman

    What fuse is the reverse lockout solenoid?

    Yes that is the right one. I just had this problem as well. This fuse feeds the rear o2 sensors, skip shift and reverse lockout solenoids.
  7. rhallman

    Check Engine Light P0141 and P0161 Faults

    I just pulled the driver side sill and looked at the o2 sensor. It had bare wire on one of the white wires right at the metal collar of the sensor. I pulled the sensor out after soaking with WD-40 to get it out. After reading a few other posts on the forum, there were a few others that...
  8. rhallman

    Check Engine Light P0141 and P0161 Faults

    I had the full Belanger exhaust installed on my 2005 Vert last fall and my installer had told me he fixed the CEL issues after install. Since the driving season here in Reno isnt all that good in the winter, I hadnt put many miles on the car until now. I noticed the CEL was on after I drove...
  9. rhallman

    Skip Shift Install under Front Seat?

    Steve.... Do I need to remove the plates under the car to access, or can I access direct? Thanks..
  10. rhallman

    Skip Shift Install under Front Seat?

    I thought I saw several posts that said you could install the skip shift resistor in a plug that accessible under the front passenger seat. Anyone done this yet vs. installing at the transmission solenoid? Mine is a 2005 Vert. Thanks...Rich
  11. rhallman

    Nevada SMOG check?

    Guys....Im having my 2005 Vert upgraded with heads, intake, headers and cam. The car will have the two back o2 sensors disabled in the program and the two front will be on. As long as there is no CEL, when I take it for the smog check....will this still pass? Will they fail on the disabled...
  12. rhallman

    Supercharger DEALS FOR CHRISTMAS!!

    What HP and TQ would you expect from a Gen 3 with a full belanger exhaust installed? Thanks...
  13. rhallman

    New Belanger Install and O2 faults

    Got the car back today with no errors...Looks like completely seating the rear connectors on both o2 extensions fixed the problem. Thanks again for all the help on the forum. Rich
  14. rhallman

    SCT load with error 12

    I have a new MAP file from ROE and tried to load the file tonight in the ECU. The SCT has me go through a series of turning the car on and off. Looks like it tries to then load the file, then I get an ERROR 12 on the SCT. Any ideas? I couldnt find anything on the SCT web site on this...
  15. rhallman

    New Belanger Install and O2 faults

    Spoke to my service manager and he said they checked the routing of the rear wires and all looked OK. No melted wires or wires on the exhaust tubes. Belanger had them check the connections again and they found on both sides that the connectors were not completely seated and needed to use...
  16. rhallman

    New Belanger Install and O2 faults

    I sent this thread to my service manager as well...but are people seeing that installing the Bosch wideband o2's in the back are fixing this problem? Also....I have a new MAP coming from ROE...if I have them turn off the back o2 sensors...will that flag my smog tests as invalid, or is that...
  17. rhallman

    New Belanger Install and O2 faults

    I just had a full Belanger exhaust installed on my 2005 vert and we are now seeing O2 sensor faults throwing a CEL. Faults are O2 sensor high voltage on BOTH left and right rear O2 sensors. We are talking with Lou Belanger's tuner in the morning, but wanted to see if anyone else has seen this...
  18. rhallman

    Balenger Head Gasket Issue

    Great!!! Thanks....
  19. rhallman

    Balenger Head Gasket Issue

    Can you provide part numbers? Thanks...
  20. rhallman

    Balenger Head Gasket Issue

    What is the OEM part number for a 2005 SRT-10? Thanks...
  21. rhallman

    WTB: 2005 Commemorative Edition Poster

    Looking for a poster of the 2005 Commemorative Edition Vert. anything out there? Thanks....Rich
  22. rhallman

    Disable TPMS - 2005 SRT-10

    After several runs to the Tire shop and dealer and about $700 later...I still find the TPMS alarms going off when they want to. Sometimes it will continue to chime at me every second or so for the entire trip. I figured there needs to be some way to kill this. So I pulled the console...
  23. rhallman

    Do I need to program my ECU?

    Installing a full Belanger exhaust (Headers to Tips)and K&N Air Intake. Will I need to reprogram my ECU and will the car still pass SMOG checks? 2005 Viper... Thanks... Rich
  24. rhallman

    Performance Service Center - Sacramento?

    I live in Reno and am looking for a Performance Service Center that works on Vipers. Reno is pretty slim picking right now and wanted to see what was in Sacramento or near there. Thanks.. Rich
  25. rhallman

    Vanity Plate Names

    Just ordered mine... ZR EATR

Latest posts

Staff online

Members online

Total: 1,121 (members: 13, guests: 1,108)

Forum statistics

Threads
153,843
Posts
1,686,696
Members
18,455
Latest member
Mando9595

Share this page

Top