Search results

  1. M

    Verified 1/4 times

    I find that Grand Nationals taste like Chicken!!!!! Regards,
  2. M

    '98 GTS Ported Heads & Exhaust Dyno Results

    Re: \'98 GTS Ported Heads & Exhaust Dyno Results Yes, you will need to step up to a good aftermarket header setup. That is if you want to maximize your potential. The stock "header" setup will not cut it. Sorry Ryan, the blower car example does not work the same with a Naturally...
  3. M

    '98 GTS Ported Heads & Exhaust Dyno Results

    Re: \'98 GTS Ported Heads & Exhaust Dyno Results The numbers are not bad. You can certainly get more out of it with additional bolt on's. Also, fyi - you can get a combination that will make power beyond 5600. My car pulled over 560 from 5500 to the 6200. It did not drop off until it hit...
  4. M

    Crankshaft Pulley Mess

    Same thing happened to me. It is not that unusual. I would not sweat it. Regards,
  5. M

    What is the best way to acheive 600 RWHP with a Viper ?

    Mondir - I can consistently pull in the 560's. Regards,
  6. M

    VIPER GTS VS. '03 996 TT X-50 RACE VIDEO!!!

    Re: VIPER GTS VS. \'03 996 TT X-50 RACE VIDEO!!! I was just on the site, and it worked for me.... I saw both videos. They were VERY close runs. Good info!
  7. M

    What is the best way to acheive 600 RWHP with a Viper ?

    Moundir - You can also look into RSI and dare I say Henn.essey Performance. (especially if you are doing the install yourself) That is what I did! They both use similar combinations of parts. Anyway, I am a big fan of N/A power. Regards,
  8. M

    RSI/jkracer runs 9.46@151+

    Congrats Rohn. That is great! Regards,
  9. M

    What is the best way to acheive 600 RWHP with a Viper ?

    600 RWHP for a blower car is cheap and relatively easy to do. You could also consider going with a heads and cam package... There area few heads and cam cars running around with 600 at the wheels but most good combinations will yeild 560/560. Not bad for N/A. Just another thought.
  10. M

    SRT Engine Failure With Less Than 1k Miles Clocked

    Amen Larry - I can attest to hard mileage and very very few problems. (knock on wood) I have 50k miles on the car.... 565 at the wheels on motor and big numbers on the squeeze! Regards,
  11. M

    Will Hennessey Vipers Become Collectors Items?

    Re: Will [******] Vipers Become Collectors Items? Hey all - I dont know how much exposure this thread is still getting, however, I can relay to you my real-world experiences with a bonafide Venom 650R. When I am out and about I do get a consistent number or WOW that is a Hen nessy car...
  12. M

    So whats next

    My best pull is 565/563. At the last Dyno day I did 550/554. I know my Heads were worked BIG time, and the cam is huge. So I would guess that is where the difference must be. Good luck! Regards,
  13. M

    So whats next

    hmmm.... Lets see, underdrive pulley, Flywheel, Extrude hone the intake, 70mm TB's. Did you go with Bigger Valves?? Did you really, really work the heads? How about the cam- Does it have crazy lift? Those are a few of the things that can pick up a bit of power. Not 50 more at the wheels...
  14. M

    Twin screw vs. Centrifugal - Interesting observations

    Yeah, when are all you slow pokes going to wake up and realize that NITROUS is the way to go?????? ;) Regards,
  15. M

    Ebay 96 [******] info

    No JD, They come free to you....Cause you will always be looking at that view...MY EXHAUST!!!!! Regards,
  16. M

    Ebay 96 [******] info

    While I agree that 85k may be a bit steep.....It is certainly worth more than a stock '96. Some of you have been smoking CRACK. But to each his own, if you want a stock car, then a stock car is worth more to you. I know all the work, time, and quality parts that went into my 650R - and I'll...
  17. M

    Georgia Autocross: March 16

    ok, cool...I was debating if I was going to come out in this weather! I will wake up early and see how things look for tomorrow AM. I can't go to the Autocross, but maybe I can tag along for a while and show those Vette boys what 750 at the wheels can do! Good luck with your tuning. Regards,
  18. M

    Georgia Autocross: March 16

    Tony, Have you decided yet if you are goint to Dynolab today? Regards,
  19. M

    How much less would you dyno with 3.55 or 3.73

    Experience tells me you will lose 3% with the gear change.... Maybe your results will be different! Regards,
  20. M

    viper problems?

    no
  21. M

    Georgia Autocross: March 16

    Yes, Optic is the big talker.... His car is fast. We were neck and neck - Me on motor and him on spray..... I do not think his Z is ready to play. His Cobra though is putting over 600 to the ground. Anyway, Barrett is out for me on Saturday. It's just too far for me to go with the limited...
  22. M

    Georgia Autocross: March 16

    Hey, another thing - Sunday AM on GA400 is usually a good time too. So anyone not doing the Autocross, maybe we could meet at 9:00am at the Abernathy Marta Park and Ride? (GA400 exit 5B) Anyone up for that?
  23. M

    Georgia Autocross: March 16

    Ryan - I "should" be available for some stuff on Saturday - between 8-10pm. I would love to do some roll-on stuff. What part of town? I am near 400/285, so make it close..... Regards,
  24. M

    Georgia Autocross: March 16

    Lets go find some bikes to run on Saturday night. Also, I would like to take a look at your Roe unit Tony. Regards,
  25. M

    HELP! Need VCA member near Palmer Dodge in GA

    Those idiots took my car to NTB to get tires put on just down the road. They ASSURED me that they would not leave it there.....Well guess what. THEY LEFT IT AND A MECHANIC STOLE IT! They drove it over a curb and caused minor damage.....Luckily it was all caught on tape, and fixed to my...

Latest posts

Staff online

Members online

Total: 757 (members: 14, guests: 743)

Forum statistics

Threads
153,845
Posts
1,686,712
Members
18,457
Latest member
Brogan

Share this page

Top