Search results

  1. D

    Gen 5s rolling out...

    black looks sick!
  2. D

    Car keeps popping the pass side headlight fuse, low beam (HID conversion)

    Car keeps popping the pass side headlight fuse, low beam (HID conversion) I have had HIDs on the car for over a year, no problems other than an odd intermittent loose connection on the pass side. I'd turn on the lights and have to get out, smack the headlight housing, and the headlight would...
  3. D

    Heffner Stage 3 Twin Turbo Pics

    How much noise does the iab valve make? Mine was soooo anoying. Ended up routing it to the charge pipe and eliminating that filter. When your iab valves fails soon, you might consider that modification. it should see equal boost pressure across it for endurance. Fyi How much boost you got...
  4. D

    Hood Pads for Gen I/II?

    I sprayed the aerosol paint into a cup and brushed it on. i didnt trust the masking tape to give me a clean line. The brush worked well.
  5. D

    DIY Roe Dual Walbro Pump Installation For Gen II's

    I have three pumps in my tank and i wired each up to separate switches. One to the ignition key and the other two to individual switches so I can tell if one goes bad. You can hear them but watching the fuel pressure, they each will blip the fuel pressure up a bit when you switch them on. just...
  6. D

    Engine Rebuild in Chicago

    Speed inc will likely farm the work out to Rich Groh. He built a couple of my 1000hp ford engines in the past. He has built some viper engines as well. He is one of the top builders in the mustang/ ford arena. Many of the top guys in NMRA and FUN ford run his engines. If you can pull you...
  7. D

    mods that can still be used with a twin turbo setup?

    Change thermostat Change clutch
  8. D

    HPDE Spin Out 5/19/12

    also-- dont ride the "LINE" as soon as you get back on the track. make sure you are not leaking anything before you get back on the line.
  9. D

    One Lap of America

    I saw you at autobahn. I was the only other viper there-- the blue one, running with the audi club on the other track.
  10. D

    Where in the heck does this ridiculous idea that a Viper cannot handle come from?

    DAmn I appreciate your help!! I can not wait to get my ass back on the track and try some of these techniques! I think I have enough to work with for now!! THanks again!! Lee
  11. D

    Where in the heck does this ridiculous idea that a Viper cannot handle come from?

    the super sports I have on my fronts are excellent -- still only a 275/35/18
  12. D

    For Those Who Have Not Seen a Carbon Fiber Drive Shaft

    I think the figure is each 1 lb of rotational mass reduction is equal to 8 lbs of stationary mass. so 32 lbs off the rotors= 250 lbs of weight loss-- certainly a seat of the pants difference. 2-3 tenths off in the 1/4 mile.
  13. D

    VCA Exclusive - Forgestar F14 Rotary Forged Wheels - 19x10 and 20x12

    I need a pair of vr3p's for the rear of my car--- 19 x 13" polished clear coat, with the bolts hidden-- pretty sure they can do that. can you give me a price on them? Thanks Lee
  14. D

    Where in the heck does this ridiculous idea that a Viper cannot handle come from?

    Thank you again for the info! I have carbotech 10's and 8's on my big brake kit with motul 660 brake fluid. The car stops very very well and I never had the ABS kick in. I do know abs works because I did participate in some braking exercises and some lane toss drills etc, but on the track, they...
  15. D

    Where in the heck does this ridiculous idea that a Viper cannot handle come from?

    thanks for taking the time to write this up
  16. D

    Where in the heck does this ridiculous idea that a Viper cannot handle come from?

    So... as a beginner in a viper, (gen 2) on the road course-- do you suggest full soft on the shocks, and loosen up the sway bars? ( my stuff is all aftermarket and adjustable) Allow more roll or yaw and get the feel , then tighten things up as you feel confident? I took mine out last week- first...
  17. D

    twin turbo GTS, creating a lot of heat in the foot wells. How can I fix this?

    Thats how i did mine - like the pics above-- but I wrapped the down pipe and the WG pipes too. wrapped every thing-- and then I took the stock alum heat shield that was on the foot well and I flattened it out, then wedged it back up into the stock location to protect the speedo cable and...
  18. D

    BLACK Sparkplugs... fouling... Supercharger build startup help. 50psi fuel at idle.

    Re: BLACK Sparkplugs... fouling... Supercharger build startup help. 50psi fuel at idl I dont agree with the point that boost referenced regulators cant see vac. there are literally 10s of thousands of them doing so in the mustang world alone and they run just fine. I am running mine on my...
  19. D

    twin turbo GTS, creating a lot of heat in the foot wells. How can I fix this?

    I have turbo blankets on mine and its cool as stock. U have them?
  20. D

    Mansory Aventador First Official Road Test

    sweet dash
  21. D

    Uhaul Style Auto Transport?

    yes, i tried both ways-- i have pics of it the other way too. it was actually worse. I needed extra wood on top of the trailer under the tires, but then, I wouldnt be able to get them back out! I ended up driving to the track. Actually for 3 tool boxes, a big floor jack, pair of jack stands, 5...
  22. D

    New Wheels & Tires today

    Looks great with the yellow
  23. D

    Uhaul Style Auto Transport?

    pics of the best angle i could get the trailer
  24. D

    Uhaul Style Auto Transport?

    I tried to get my car on the uhaul trailer yesterday-- no luck. my car is just too low. I used 4 2x10 boards 8ft loog to extend the ramps, and I hacked the tongue up on the trailer, had the trailer angled on my driveway apron.... no luck. Im driving the car to the road course track tonight. I...
  25. D

    Fast bleed vs slow bleed lifters

    What's your technique for doing it without removing the heads ? Magnet ? How big is the hole in the hg you have ? Any pics of those gaskets? ?

Latest posts

Members online

Total: 794 (members: 2, guests: 792)

Forum statistics

Threads
153,843
Posts
1,686,697
Members
18,455
Latest member
Mando9595

Share this page

Top