Search results
-
S
94 Viper won't start!!!
94 Viper won\'t start!!! Hi all, a friend of mine is having a problem with his 94 R/T..parked it last week now it will not start.it cranks but no fuel..we have checked relays etc,and when I jumper the rear relay in the trunk the fuel pump comes on,and the car will start and run tried new relays...- Scott E. Smith
- Thread
- Replies: 1
- Forum: RT/10 and GTS Discussions
-
S
1993 Intake and NX Express??
Oh and I run the 200 shot, colder plugs are a must and an upgraded cooling system is recomended.but I've sprayed for two years now with no problem.- Scott E. Smith
- Post #5
- Forum: RT/10 and GTS Discussions
-
S
1993 Intake and NX Express??
Had the same question myself....ended up finding the fuel pressure port is on the drivers side runner in the very rear behind the map sensor. I currently have the NX kit on my 94 with no problems at all! only the 93 and early 94 intakes (with 4 ribs on the runners)have this setup....but be...- Scott E. Smith
- Post #4
- Forum: RT/10 and GTS Discussions
-
S
Has anyone changer their intake?
Hi all, long story short found the recent problem with my viper to be a cracked upper intake runner.I currently have the early style (4 ribs on each runner)intake. I got a used one that is the newer 3 rib from Jon B. but the fuel supply line is different ...new one is a thread in line old was a...- Scott E. Smith
- Thread
- Replies: 0
- Forum: RT/10 and GTS Discussions
-
S
94 R/T ....CRACKED INTAKE
that's the million dollar question. as far as I know it's stock. I've had the car 6 years and bought it from the original owner. maybe some moisture in the fuel system? it did get in the low single digits here for a while.well I e-mailed Jon b at parts rack...he's helped out alot in the past.my...- Scott E. Smith
- Post #9
- Forum: RT/10 and GTS Discussions
-
S
94 R/T ....CRACKED INTAKE
Sorry Vic.....you were correct!!! and thanks to all who chimed in...any insight helped..it was tough to locate.as for tig welding it....the manifold would have to be cut open just to get to it,it's inside the runner at the very rear.so I'm trying to locate a used one.pluse if it let go in one...- Scott E. Smith
- Post #7
- Forum: RT/10 and GTS Discussions
-
S
94 R/T ....CRACKED INTAKE
Well some of you have been trying to help with my 94 R/T not running right.....turns out it has a crack in the driver side runner spraying fuel everywhere and right down the throat of cyl # 10 how? why? who knows!!!!! obviously unrepairable ....so does anyone have a stock intake they would like...- Scott E. Smith
- Thread
- Replies: 8
- Forum: RT/10 and GTS Discussions
-
S
Viper not running well...
Ok new find.....removed smooth tubes etc. looked into runners for possible blockage...found raw gas pooling up in the drivers side runner(feeds passenger head)ok this explains the fouling only on pass side...but where did it come from????? I mean there's alot of gas in there!!!- Scott E. Smith
- Post #18
- Forum: RT/10 and GTS Discussions
-
S
Viper not running well...
well still no luck.....battery cheecked out ok. started and let run again,once again passenger side plugs fouled, #10 was the worst. driver side plugs still looked new.may have to take it to the dealer..a drb scantool would be the next step I guess.something weird going on here.- Scott E. Smith
- Post #16
- Forum: RT/10 and GTS Discussions
-
S
Viper not running well...
Ok thanks for all the input thus far....plenty for me to check today....question about the battery, is it possible for it to be able to crank the engine etc and still have aproblem that may cause my scenario? because it did have to be recharged a month ago when it died for no appearant...- Scott E. Smith
- Post #14
- Forum: RT/10 and GTS Discussions
-
S
Viper not running well...
ok this is strange....pulled all the plugs again, passenger side plugs are much more fouled than drivers side,even still a little wet with gas.drivers side not nearly as bad.- Scott E. Smith
- Post #9
- Forum: RT/10 and GTS Discussions
-
S
Viper not running well...
it has only been sitting for about a month,ran fine last month.wires about one year old (msd) it also has the Roe Racing VEC1 coil packs are roughly two years old, battery is new, air filters are clean.just pulled the plugs again...very black and sooty, all the same.maybe TPS? or coolant temp...- Scott E. Smith
- Post #7
- Forum: RT/10 and GTS Discussions
-
S
Viper not running well...
Ok here's the scene....took the Viper out last night ( 94 r/t) Iimmediately noticed it was runnung roug from 1-3k rpm brought it back home..next morning checking it out...would not start hat to go WOT to get it to start...running very rich, plugs appeared fouled ..replaced them ..same...- Scott E. Smith
- Thread
- Replies: 18
- Forum: RT/10 and GTS Discussions
-
S
Optima Battery
what he said!...it voids the warranty to cut the terminals....even if the 16yo. rocket scientist at the local auto zone say....uhhh it's cool dude, no problem we'll make it fit. ohh...baddasp...where in fairfax are you from? maybe you've seen me....94 red r/t "venimos" on the tag...curious if I...- Scott E. Smith
- Post #8
- Forum: RT/10 and GTS Discussions
-
S
Thinking of changing color on my Viper
thanks matt....that may be a good idea!!!!! so far were on 5 coats of clear multiple wet sandings.....then the graphics this weekend....then some more sanding and 2 more coats of clear,should look like a deep mirror when finished! and yes it was completely torn apart to paint!it's the only way...- Scott E. Smith
- Post #38
- Forum: RT/10 and GTS Discussions
-
S
Thinking of changing color on my Viper
roadkill....awesome color....in certain light my color has a darker purple effect...cool to see one in that color!!!- Scott E. Smith
- Post #21
- Forum: RT/10 and GTS Discussions
-
S
Thinking of changing color on my Viper
hey matt....I'm putting on the same front splitter, do you have any problems with driveways?do you find you have to back in alot?and do you have any type of chin guard under there?...everything is still off my car so I don't really have a grasp of how low it will be!- Scott E. Smith
- Post #20
- Forum: RT/10 and GTS Discussions
-
S
Thinking of changing color on my Viper
I'm in the middle of a color change now....it's a very dark burgundy pearl metallic...with ghost flames on the sides....ghost stripes...with inlaid ghost flames....matching valve covers,matching nitrous bottle..etc. it's a 94 r/t I've had for 5 years...and I could care less about resale....I...- Scott E. Smith
- Post #6
- Forum: RT/10 and GTS Discussions
-
S
Who has named their car?
someone called my red r/t a "clown shoe" it seems to have stuck.- Scott E. Smith
- Post #37
- Forum: RT/10 and GTS Discussions
-
S
FINSHED! Pics of RT-10 with custom roll bar, stripes, spoiler and wheels!
WOW looks great! I'm actually having my viper painted right now...black cherry pearl metallic it's going to have ghost stripes in a marblized finish. I have the same rear spoiler also the front splitter. I like your stripe color. just curious I can't see the roll bar real well....does it extend...- Scott E. Smith
- Post #5
- Forum: RT/10 and GTS Discussions
-
S
How Hot Do They Get???????
has anyone used header wrap on the catalytic converter itself? my problem is I'm missing any form of heat shielding on the driver's side. and appearantly to get replacement...you have to purchase an entire sidesill assy.- Scott E. Smith
- Post #18
- Forum: RT/10 and GTS Discussions
-
S
Battery tender $16.99....link
" there's a sucker born every minute" I beleive that's the quote.....I've use thes same tenders for my viper and lawn tractor for over three years...never a problem.- Scott E. Smith
- Post #8
- Forum: RT/10 and GTS Discussions
-
S
How Hot Do They Get???????
Don, did you by any chance use thermotech in the 12x 24 sheets? I'm curious because my viper is in the body shop and I was going to install the same stuff in the side sills. also...has anyone used header wrap to wrap the exhaust behind the sills? my new paint is very custom and expesive....i...- Scott E. Smith
- Post #4
- Forum: RT/10 and GTS Discussions
-
S
My headgaskets
I have done this job also.....take the heads to a good machinist.gen 1's heads tend to "walk" due to the initial torque from the factory. this causes warpage which needs to be addressed.also a good time to go with a 180 t-stat.you need to check the cylinder sleeve protrusion with a feeler gauge...- Scott E. Smith
- Post #9
- Forum: RT/10 and GTS Discussions
-
S
Transmission Removal Help
while the trans is out...this is a great time to replace plug wires! assuming you need them at this time.- Scott E. Smith
- Post #10
- Forum: RT/10 and GTS Discussions
