Search results

  1. G

    My Garage Floor Project...

    i have a business that does this sort of thing, somewhat by accident, we travel all over the southeast with the race shop floors as well as the most level epoxy surface plate in the world for the most serious of racer. The coating is the easy part as stated above, what people don't realize is...
  2. G

    ashamed to be seen in your viper, if you see a c6 z06 ?

    Don't you know that Corvette owners rate their HP at the flywheel not the rear tires, take off 15% and it was pushing maybe 360 at the tires. so a 12.70 was not bad, but my Viper friend still spanked me with a 12.1 thanks for clearing that up, my bone stock GTS went 12.15 at 119, and my bone...
  3. G

    to much bling

    LOL at this thread. This guy has to be jacking with you guys, or it's more proof that wealth doesn't buy good taste.........
  4. G

    ashamed to be seen in your viper, if you see a c6 z06 ?

    Ummmmm you need to pick a different hobby. 12.70's at 108, were you at Denver or what? With 420hp that's about the worst display I've ever seen. Just for grins, how quick have you been in a viper?
  5. G

    Building a 542 stroker motor, need cam specs

    When you use the rocker ratio you ease the strain on the lifter bores. Most big buck pushrod stuff....aka nascar, uses rocker ratios in the 2.somthings.
  6. G

    New Best MPH with a Bone Stock GTS

    I've heard that some late 97 production cars had a different camshaft due to a shortage at the factory????? My dad's 97 was built in december of 97 and has a noticeable lump at idle. It also ran a [email protected] in the fall of 2000 on the original tires with a 1.97 60'.
  7. G

    What RPM to launch for 1/4

    don't ask me why it turned that into an e-mail, sorry.
  8. G

    What RPM to launch for 1/4

    launched at 2K, slid the clutch with 22psi with the pilots and that was a 1.92 60'. Bone stock 97, tubes filters and all went [email protected] on that pass.
  9. G

    Add T&D's and lost 20RWHP!?!? WTF!!!

    Re: Add T&D\'s and lost 20RWHP!?!? WTF!!! What race track was that, to have that much done to your car I'd think it would be in the 11's pretty easy?
  10. G

    I do believe I'm gonna have to switch gears....

    Re: I do believe I\'m gonna have to switch gears.... Car went from 12.15 to 11.90's going from 3.07 to 3.45 no other changes. All on michelin pilots that it was born with. Mid 1.90's on the 60'
  11. G

    Best Souce for Viper Rear Axle Gears

    I set up a 3.45 in my fathers bone stock GTS and it seems to be very nice and easier to keep the back tires on it compared to the 3.07. As far as prices go, i think the bare ring and pinion is around 350-400 maybe cheaper and then $100 worth of bearings and seals.
  12. G

    Watch out, I was followed home!

    Too bad you don't live in Texas........shoot 'em then drag them onto your property.
  13. G

    Stock vs. T&D rockers (pics)

    Re: Stock vs. T&D rockers (pics) Thank you sir, that's the info i needed.
  14. G

    Stock vs. T&D rockers (pics)

    Are there any stampings on the lower side of the pivot on the T&D's.
  15. G

    Space Shuttle Lost

    Parts are scattered from just east of dallas all the way to college station out to nacadoches.
  16. G

    willwood brake system for viper.

    www.stockcarproducts.com
  17. G

    willwood brake system for viper.

    count the number of bolts holding the disk to the hat and measure the outside dieameter and number of vanes. The rotors are probably off the shelf units. Something like a 13.1 60 or 48 vane rotor with 20, 12, or highly unlikely 8 bolts.
  18. G

    willwood brake system for viper.

    What calliper is it.....GNIII, or an Integra 6 or prolite 6. Either way the rebuild kits cost about $10 per calliper at the most.
  19. G

    Vette Z06 Vs Viper - New Member

    I own an 02 Z06 my dad owns a 97 GTS, guess which one i drive on the weekends. GET THE VIPER
  20. G

    Differential drain plug

    I'm beginning to feel your pain VIPER = VICTIM, no thanks i'll do the stuff myself.
  21. G

    3.45 or 3.54

    I'll post picks when it explodes, should be interesting.
  22. G

    3.45 or 3.54

    That's good info, thanks, but for the price we will see how long it will last just for giggles.
  23. G

    3.45 or 3.54

    Which one is better for a bone stock car, not planning on any other modifications. Are both ratios really available or am i recieving bad info?
  24. G

    3.45 or 3.54

    Well my decision made itself today. Bought a factory Dana 3.45 new in the box with bearings and pinion seal for $175. I didn't argue to much on the price as you can imagine. I kept trying not to act too excited, none of the guys had anyone buy just a ring and pinion before and the boss wasn't...
  25. G

    gear swap

    Thank you, this car is a bone stock 97 which ran 12.15@119 and change with a 2.0 60'. Will the 3.45 or 3.54 pick this car up much? Any suggestions or comments would be appreciated.

Latest posts

Members online

Total: 991 (members: 8, guests: 983)

Forum statistics

Threads
153,841
Posts
1,686,683
Members
18,454
Latest member
Mopar SRT

Share this page

Top