I have a P0161 fault that is showing 2/2 sensor heater bad. Where is the Bank 2 sensor located? Driver or passenger side? I know its the downstream after the cat sensor, but not sure if its driver or passenger side?
Thanks...Rich
I looked for those access points and wasn’t able to see how easily I could get to them. Prior to this morning I noticed that when cold the oil pressure was at 50 when normally it would be at 75. When warm would be around at 40 or so at idle...50 at 2500 rpm or so.
This morning it started...
Im looking for an easy access point to install a test oil pressure gauge to verify if I have a gauge / sensor issue or a issue with an oil pump. Thanks...
I trying to confirm if I have a bad oil sensor and am looking for a place to hook up my oil pressure test gauge. I know I can remove the sensor and connect there...but it is in a real tight place to remove the sensor and was looking for an easier access point to test with the test gauge...
Shandon....
I think you may be on to something. I did notice when I was getting the noise when I was turning a sharp turn it almost felt like I lost the PS at one point. Ill go out and check the fluid level in the PS unit.
Thanks!
Wanted to check with others to see if anyone has replaced a bad cooling fan before? I am noticing that when the oil gets to around 200 deg on hot days Im hearing a loud noise (Bearing?) from the fan area. Also when I increase RPM it also gets louder. Also most like it follows with the oil...
Looking for anyone who has already replaced their power steering lines that has a paxton installed? Want to know if I need to remove any of the paxton or the paxton water cooler to acccess the fan line connections?
Thanks...
Rich
I noticed a small amount of oil under the car over the past month and found that the oil return line that comes off the paxton is seeping a small amount of oil at the fitting that goes into the supercharger.
The instructions say not to use teflon tape on the threads, but is there a big...
Does anyone have another link to the video? The streetfire.net link doesnt seem to work. Ive found videos of the preview, but not of the full aired session. Thanks..
A few months back I called Devon at Unitrax for a replacement diff. He was great to talk with and he even had a core there to re-bearing and installed the new WaveTrac assembly in it. The price was awesome and the customer service could not be beat. I'd call Devon before doing anything...
I just picked up a tr6060 in the original shipping create. The part number is 68083527AA and the word TEST after the word tranny on the lable. For those who got the prototype transmission, was the shipping crate lable marked with TEST? Or any other indication on the transmission that it is a...
Since I’m changing out my transmission for a TR6060 soon on my Gen 3, I want to change out the Clutch / Flywheel as well. Will also be changing out the Slave Cylinder / Throw-out bearing.
I’ve looked at several options (BBG, SPEC and several others). Wanted to know what others have...
Just purchased a NEW TR6060 2010 model transmission with the updated gears from Jon B at Parts Rack. Also got the Gen 4 Drive shaft from him. Even if you dont see what you need on his web site.....give him a call. He had a great deal and it has already shipped. Awesome customer...
Anyone have a line on who has decent deals on a TR6060 Transmission to replace my Gen 3? Ill be getting the conversion kit from VPA.
Not sure I want to go with an upgraded G-Force yet, but may be an option.
Thanks...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.