Search results

  1. I

    which clutch, flywheel and clutch hydraulics for SRT-10 in BMW Z4?

    I got already details from him. Looks very well. Thank you.
  2. I

    which clutch, flywheel and clutch hydraulics for SRT-10 in BMW Z4?

    Does someone know Centerforce DF985985 - Centerforce Dual Friction Clutches ? It is the only one available here, but I am afraid it could be not reliable.
  3. I

    which clutch, flywheel and clutch hydraulics for SRT-10 in BMW Z4?

    Thank you for your quick reply. I would prefer to know the experience of some people who have used the parts on track, before I ask a vendor, who wants to sell the parts.
  4. I

    which clutch, flywheel and clutch hydraulics for SRT-10 in BMW Z4?

    Hello, I want to change clutch, flywheel and complete clutch hydraulics now. What do you recommend for SRT-10 engine and gearbox out of Dodge RAM year 2004 in BMW Z4 Coupe? Driving: Drift and track (no comfort needed but should be robust and reliable) Total weight: 1400 kg / 3000 lb (rear...
  5. I

    Problems with clutch hydraulic

    Sorry, have made new thread for this.
  6. I

    How to set the "quantity of teeth" for speed sensor in the ABS electronics?

    Hello, does anybody know how the standard brake software can be set? With the Bosch KTS 670 computer I can see the number of teeth for the rear-axle differential as the ABS but I can not change it. The ABS including software is from Dodge RAM SRT-10, which is used in a BMW Z4 now. The...
  7. I

    Problems with clutch hydraulic

    The hydraulics still does not work correct. I think best solution would be a complete hydraulic upgrade kit. Which Upgrade Kit should I take? The kit from Roer Racing seems to be good: http://www.roeracing.com/productcart/pc/Clutch-Hydraulics-Upgrade-Kit-04-06-Dodge-SRT-10-Ram-p395.htm any...
  8. I

    Problems with clutch hydraulic

    Thank you for the link. This will help a lot. Also I will contact German regions.
  9. I

    Problems with clutch hydraulic

    Thank you. Always the straight tip :headbang: I will do so this week and hope it will fix the problem. Otherwise take out and change everything, like Roysviper said.
  10. I

    Problems with clutch hydraulic

    Thank you for the detailed information. If I have to change the slave cylinder, I will also change everything else. Good idea. :2tu: But I suspect, that it is not possible to get the gearbox out separately, as there is not so much space in the Z4. Of course we will try this first. Could...
  11. I

    Who has increased oil pressure for track use?

    Sorry, I did not understand very well, what you mean. I use Castrol TWS 10W60. Oil pressure is very constantly at 72 psi from 800 up to 6000 rpm (checked with Bosch KTS) With slightly increased spring pressure in the oil pump it goes up to 82 or 92 PSI. Pressure varies about 1 or 2 PSI...
  12. I

    Problems with clutch hydraulic

    Thank you all for the replies. Did not see any leaks but the brake fluid was a little bit low. The master cylinder is OK. Will check with the endoscope camera on Monday, if there is any leaking inside. I hope the slave cylinder is still OK. To change it we would have to take out the engine...
  13. I

    Problems with clutch hydraulic

    After testing the car on track for some short stints the clutch got softer and softer until it did not work completely. Today we checked again. First the clutch was working, not very well, but it was working. After about 10 minutes with running engine it was the same problem again...
  14. I

    Who has increased oil pressure for track use?

    For some tests with the remote oil filter and its over pressure valve, I had increased the oil pressure. As this is simple and steady I thought of increasing the oil pressure permanently from 72 to 82 or 92 PSI. Did anybody do this before and what was the result?
  15. I

    reason for loud hydraulic noise at the rear of the SRT-10 engine?

    I am sure that it is not a bearing. Also the noise does not change when pressing the clutch.
  16. I

    reason for loud hydraulic noise at the rear of the SRT-10 engine?

    The noise is not a mechanical sound. It sounds like typical hydraulic problem, like air in the steering pump or exceeded pressure in a valve. First I thought the noise is caused by the steering pump or the hydraulic fan, but it comes definitively from the rear end of the engine. Is the oil pump...
  17. I

    reason for loud hydraulic noise at the rear of the SRT-10 engine?

    The noise was before the problem with the clutch appeared. Can the oil pump cause this noise, if the oil viscosity is higher? I presuppose that the clutch problem, is due to overheated hydraulic clutch line. The clutch line passes near by the exhaust manifold, and maybe the heat protection...
  18. I

    looking for datalogger to logg oil pressure on track.

    Thank you. So I will go for complete separate system with additional sensor.
  19. I

    looking for datalogger to logg oil pressure on track.

    I can read oil pressure over OBDII with the Bosch KTS 670, so that PID should be available, but you are right the sample rate is not very high.
  20. I

    reason for loud hydraulic noise at the rear of the SRT-10 engine?

    Thank you for your quick reply. The noise is hot and cold. I am not sure if better or worse when hot. Will check this asap and try to get sound file. The engine was not open. It is completely original except oil pan and replaced oil filter. It was sitting for about 7 month, in a dry...
  21. I

    reason for loud hydraulic noise at the rear of the SRT-10 engine?

    Hello, the SRT-10 is running well in BMW Z4 now, but there is a loud noise in the back area of the engine next to the gearbox. The noise is very loud, sounds like hydraulic problem and ends after some seconds running on idle speed. Does anyone know the reason of this noise? Can it be...
  22. I

    looking for datalogger to logg oil pressure on track.

    Where can I find the PID to read the oil pressure over OBDII? I tried some PID to read the oil pressure but they did not work.
  23. I

    looking for datalogger to logg oil pressure on track.

    Thank you very much for your information. I have send enquiry for AEM AQ-1 Data Loggin​g System​. Are there any experiences with it here?
  24. I

    looking for datalogger to logg oil pressure on track.

    Does anybody use AIM EVO4 16M, 5CH? http://www.ebay.com/itm/230533359921 It seems that this could get all required informations.
  25. I

    looking for datalogger to logg oil pressure on track.

    Thank you for your message. A Digital Dashboard is not required, as we already installed the original Dashboard in the Z4. I am looking for a simple solution to logg the oil pressure during track time. This could be stand alone or with smart phone. For the connection I would prefer OBD or...

Latest posts

Members online

Total: 794 (members: 6, guests: 788)

Forum statistics

Threads
153,228
Posts
1,682,197
Members
17,719
Latest member
akonakku

Share this page

Top