1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

FS- Roe Supercharger

Discussion in 'What'cha Need for Your Snake?' started by groundshark, Oct 12, 2019.

Thread Status:
Not open for further replies.
  1. groundshark

    groundshark VCA E-Member - International VCA Member

    Posts:
    12
    Joined:
    Jul 5, 2016
    Location:
    Toronto/Ontario/Canada
    Description:
    Roe Supercharger for Gen 2 Viper 2.4L first generation with the VEC. ALSO intake manifold upgrade kit included : (plenum/sct flash device/ 60# injectors) You will require a 2 bar map sensor !! 5000.00 USD plus shipping
    Any more info. Please feel free to
    ask.
    Or call me directly @
    Sold, Phone # edited off

    upload_2019-10-12_11-24-8.jpeg

    49680759-1372-4476-B422-F1DB76D7D146.jpeg
     
    Last edited by a moderator: Nov 29, 2019
  2. maxpower2913

    maxpower2913 Enthusiast

    Posts:
    2
    Joined:
    Jul 29, 2019
    Location:
    Halifax
    Curious, what power did this put down on your setup?
     
  3. groundshark

    groundshark VCA E-Member - International VCA Member

    Posts:
    12
    Joined:
    Jul 5, 2016
    Location:
    Toronto/Ontario/Canada
    Don’t know lol....let me explain
    I had it Installed then car sold before dyno ! New owner wanted it removed. So the only answer I have for you is BUTT dyno !! First and second gear with the 3:55’s broke traction instantly. That’s with toyo Proxies r888’s. It was just on the tune from Roe via the SCT device
     
  4. groundshark

    groundshark VCA E-Member - International VCA Member

    Posts:
    12
    Joined:
    Jul 5, 2016
    Location:
    Toronto/Ontario/Canada
    Charged01ACR was running this kit
    ( I bought it from him )
    He had virtually the same set-up as me. He might be able to chime in with his numbers ??!!
     
  5. groundshark

    groundshark VCA E-Member - International VCA Member

    Posts:
    12
    Joined:
    Jul 5, 2016
    Location:
    Toronto/Ontario/Canada
    Bump price drop 4000.00 USD +
    Shipping
     
  6. Cookieman00x

    Cookieman00x Enthusiast

    Posts:
    16
    Joined:
    Oct 12, 2018
    Location:
    PA
    This has me thinking what would be needed to slap it on a gen 1...
     
  7. groundshark

    groundshark VCA E-Member - International VCA Member

    Posts:
    12
    Joined:
    Jul 5, 2016
    Location:
    Toronto/Ontario/Canada
    Cookieman00x
    I’m not sure what modifications would be needed ? As I only have experience with my Gen 2 and that install. A great resource would be Scott @ Roe he will be able to tell you in a minute what is required!!
    reach [email protected] 904-230-5422
    Other members may have more
    experience with your question.
    Either way BUMP for great price !!
     
  8. groundshark

    groundshark VCA E-Member - International VCA Member

    Posts:
    12
    Joined:
    Jul 5, 2016
    Location:
    Toronto/Ontario/Canada
    Sold
    Thanks to all
     
  9. wkooiman

    wkooiman Enthusiast

    Posts:
    12
    Joined:
    Aug 14, 2011
    Congrats to whoever bought it. I have a 2.8L Roe and 3:55 gears on my 98, and I love it.
     
Thread Status:
Not open for further replies.

Share This Page