Pics of Moroso Oil Puke install

[JimT 99RT]

I found this at Summit racing for $70. I installed it under the front cross brace on the passenger side with two 1/4-inch rivet nuts. I swapped the tube around comming off the valve covers to put the drain tube on the passenger side, later down the road I may put in AN fittings and braided lines. My Web page is down so I can't post any pics here, so if you want to see the pics you'll have to go over to the dark side...

www.viper *** alley.com/showflat.php/Cat/0/Board/general/Number/319787

(remove the spaces and "*" from the banned word "viper alley")

 

[Chuck 98 RT/10]

You won't see any posers with that mod. LOL The word "puke" has a dual meaning in this case.

 

[Vic]

I've still gotta mount my puke can, and was wondering what to do with the hose that used to go from the valve covers to the air box. I was wondering if I could just plug it up at the airbox, and let the can vent to the atmosphere? Going by that thread at the alley, it now seems the right thing to do. Good post Jim.