Have a Racelogic unit installed in an '04. Other mods are Paxton and Vec2. The vipertech I had install the Racelogic unit had done either 2 or 3 installs previously. My install seemed to work at first, car was only driven maybe 25 miles, dyno'ed it, and on the way back the tach started jumping and the car stalled, then the car wouldn't start.
Bottom line is that the Racelogic unit seems to be the problem, the only misfires are the cylinders that Racelogic is connected to.
Anyone have this problem or any insight into this type of proble?
Racelogic is looking into it, but wanted to see if there is anyone out there that might have an idea of what is wrong.
Have replaced the Racelogic unit so far, and all connections have been rechecked
Bottom line is that the Racelogic unit seems to be the problem, the only misfires are the cylinders that Racelogic is connected to.
Anyone have this problem or any insight into this type of proble?
Racelogic is looking into it, but wanted to see if there is anyone out there that might have an idea of what is wrong.
Have replaced the Racelogic unit so far, and all connections have been rechecked