Hi Everyone,
Not one to leave well enough alone sometimes
I've found that with a little massaging here and there, they will fit on 1992 -1995's, barely. The head bolts are closer to the exhaust port flanges on Gen 1 engines and the lower frame rails are 1" taller.
Since we just dynoed the RT/10 with the free flowing side exhaust this past week, we'll have a great comparison to see what difference the headers alone are worth on this car. We were at 402 rwhp and 477 ft lbs troque before. What will this new combination do? Stay tuned......
Not one to leave well enough alone sometimes
You must be registered for see images
, I decided to "try" and install a set of #17113 Borla headers on the '94. The 17113's have 1&5/8" primary tubes with 3" collectors and are for 1996 and newer cars. I was about to put this set on the GTS, but....I've found that with a little massaging here and there, they will fit on 1992 -1995's, barely. The head bolts are closer to the exhaust port flanges on Gen 1 engines and the lower frame rails are 1" taller.
Since we just dynoed the RT/10 with the free flowing side exhaust this past week, we'll have a great comparison to see what difference the headers alone are worth on this car. We were at 402 rwhp and 477 ft lbs troque before. What will this new combination do? Stay tuned......
You must be registered for see images
You must be registered for see images
