Viper EDELBROCK HEADERS & LOBAC EXHAUST on EBAY

[NorthCaliViper]

Viper EDELBROCK HEADERS & LOBAC EXHAUST on EBAY

If anyone is interested here is the link

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2409049615

 

[malcoll]

Do headers from a 1994 fit a 1996 engine?

 

[NorthCaliViper]

The EDELBROCK Headers will fit a 96 RT/10 or GTS.

 

[Chuck 98 RT/10]

Looks like the motor needs to be lifted to install them, is that correct?

 

[99 R/T 10]

No, I don't believe you have to lift the engine. They are bolted together about the middle of the headers(2 piece).

 

[Vipermed 97.01]

96 R/T 10 is correct they are 2 piece and also gen 1 and gen 2 are the same header

 

[NorthCaliViper]

The size of the EDELBROCK Headers and Exhaust are: - The EDELBROCK headers are 1 ¾” in diameter and the S.P.D. LOBAC exhaust system is 3” in diameter with a 32” muffler and a 4" exit..

 

[NorthCaliViper]

The size of the EDELBROCK Headers and Exhaust are: - The EDELBROCK headers are 1 ¾ inch in diameter and the S.P.D. LOBAC exhaust system is 3 inch in diameter with a 32 inch muffler and a 4 inch exit..

 

[NorthCaliViper]

There are 4 days 19 hours left on the Headers and exhaust. Bid is at $1075 which is a great deal for the combo. The combo list for more than $3500 new.

 

[James Bell]

Is that Lobac muffler a (3inch inside diameter) perforated straight-through design? I like that it has some length to it, but it looks like a smaller (21/2 or 23/4 inside diameter) louvered "cherry-bomb". Has anyone herd a set of those on a Viper?

 

[NorthCaliViper]

The EDELBROCK headers will fit a Gen 1 and Gen 2 viper

 

[NorthCaliViper]

23 hours left for the EDELBROCK HEADERS & LOBAC EXHAUST on EBAY