Recent content by MAMBA

  1. M

    resetting viper is this correct?

    Hey guys, I also need some help wih this. I have a Gen I 95 Viper and the battery crapped out. I removed the rear wheel, etc. and replaced with a new battery. When I tried to start the car the "Alarm Set" light came on and the car would start and immediately die. I then did the alarm reset...
  2. M

    Viper RT/10 Car Cover - Washable?

    Thanks guys. I'm going to give a go!
  3. M

    Viper RT/10 Car Cover - Washable?

    When I bought my 95 RT/10 almost 4 years ago, it came with a very nice car cover made specifically for the viper. It has a clear plastic panel where the rear license plate is. Needless to say, it needs to be washed but because of the plastic panel I have not done so because of possible damage...
  4. M

    My hard top rattles like crazy any more

    My Gen I Double Bubble hardtop has a short front latch that looks like a thumb and forefinger together in the shape of a "C". I have to put the handle of a pair of pliers or something else in the opening between the fingers to get any leverage to close them. Does anyone know if there a special...
  5. M

    INSTALLING SIDE EXHAUST COVERS ON GEN I

    Thanks guys that's what I needed to know.
  6. M

    INSTALLING SIDE EXHAUST COVERS ON GEN I

    I'm trying to install the side covers with the stock insulation on a GEN I and I have a question that I'm sure many of you can answer. When installing the top of the exhaust cover over the lip on the car, does the skin of the exhaust cover slide directly over the lip on the car or does one...
  7. M

    Gen I Side Exhaust Insulation

    Is the fiber board with the foil insulation still available new or even the foil insulation itself because I have the fiber board pieces and they are in great shape? I also have the metal pieces that holds the insulation in place. If it is still available, anyone know how much and a good...
  8. M

    RT/10 Hardtop Questions

    Chuck, I'm pretty sure the latch moved freely off the car but I will check it again. The latches on mine are about 2-1/2" long and in the shape of an elongated "C". Is that correct?
  9. M

    Last Warranty Standing

    I've got a 95 RT/10 with extended warranty thru April 26, 2006.
  10. M

    RT/10 Hardtop Questions

    There is a piece of weatherstrip on each rear side of my hardtop that sit on each rear door post when the doors are closed. This piece is about 4" long and has no weatherstrip adhesive or anything else holding it on but another piece of weatherstrip that it slips over and the door post itself...
  11. M

    Gen I Interior trim black paint match??

    I know I have seen a post about this before but did a search and nothing came up. I'm trying to find something off the shelf that will closely match the black dash and trim color in my 95 RT/10. It's not flat black for sure because flat black is a shade of two lighter. I tried Dupli Color...
  12. M

    Side Exhaust Cover Insulation Alternative?

    The guy I spoke with said to apply it to the inside of the exhaust cover with the aluminized surface facing the exhaust. He also stated that moisture would not affect it. As you said, it sounds to easy and it may be but for the small investment, I'm going to try it. It should be here in 4-5...
  13. M

    Side Exhaust Cover Insulation Alternative?

    I have been speaking to a representative of Thermo Tec Inc. which makes exhaust and heat protection materials for the automotive industry. They have a product called Aluminized Heat Barrier which comes in a 36" x 40" sheet and can be applied with their heavy duty adhesive. It protects against...
  14. M

    Front Fascia Painted and Ready For Install

    I've repainted the front fascia on my 95 RT/10 and was looking at the fiberglass front bumper tonight getting ready for the reinstallation of the fascia tomorrow. Is the fiberglass bumper just drilled and tapped for the fasteners that attach the fascia and if so what is the best fix if they are...
  15. M

    What To Replace Side Exhaust Insulation With

    I am repainting my side exhaust covers on a 95 RT/10 and would like to replace the bulky stock foil insulation. Would the insulation on newer RT/10's be the way to go or something that DEI has, etc. Looking for recommendations. I would like to use something that is adhesive backed so I can...
See more

Latest posts

Members online

Total: 733 (members: 6, guests: 727)

Forum statistics

Threads
153,202
Posts
1,681,953
Members
17,703
Latest member
shibbydude

Share this page

Top