Search results

  1. V

    I need a set of Forgelines like these - 18x10

    Looking for a set of Forgelines so I can complete a set for my car. These are the rears so I need the fronts (18x10) If you have a set that need refurbed that's ok too. I'm powder coating the centers anyway so anyone ? Thanks
  2. V

    Need new 3" Mufflers on my Random Technolog Exhaust- What's the best sound out there?

    Yes I know there's the "Official Exhaust Clip" thread but after looking at 12 pages I'm no further along in my decision making than before http://forums.viperclub.org/threads/622540-Official-Exhaust-Clip-Thread!!!?highlight=exhaust+clips Here's what I have Modded 96RT10 - 490/520 @ wheels...
  3. V

    Gen II Diff Prefer one with 3.33

    Looking for a diff that already has a set of gears (prefer 3.33) I want to swap to a set of gears but keep my diff in case i don't like it I only need the diff but would take a whole rear end if that's what it takes to buy it Thanks
  4. V

    So I decided to check my compression and here is what I got..........

    I had some time on my hands this past weekend so I thought I would replace the plugs and check compression while I was at it. The car is a 96 RT10 (GenI) and the motor has over 25k on it since I’ve modded it (48K total). In all honesty I haven’t even taken off a valve cover. I race it and I...
  5. V

    04 SRT- Need Some Help - Engine running badly

    Calling out for some help on this one. A friend of mine buys a 2004 SRT with only 18k miles a month ago. He bought a Viper because I talked him into it. He bought it less than a month ago from a dealer in Chicago and has put less than 1k miles on it since owning it. He’s never owned one before...
  6. V

    Looking for a rebuildable Gen 1 Short block

    I know I'm going to end up giving Paul Scharf a call but I thought I would try here first as someone may have one laying around collecting dust and may want to clean out their garage Looking for a Gen1 short block - must include maincaps and a rebuildable Crank and no cracked blocks please...
  7. V

    Speedo jumps ? All other gages OK ?

    It's an 02 RT10 and the speedo will spike (sometimes up to 100mph) if you give the gas a quick blip while sitting still. All other gages work fine. The Speedo works fine once you start moving. It seems to only do it when stopped Anyone heard / seen that one before ?
  8. V

    Broke a Unitrax Half shaft - Thought it was rated for 1000hp

    I bought these new some 3-4yrs ? ago. I don't think I have more than 10k miles on them. I bought the higher hp ones for weight savings and a piece of mind knowing I would never break them. My car only makes 490/520 at the rear wheels on motor and I do spray it. Last night I had a short (no pun...
  9. V

    Viper Fraud ! What legal action can one take ? Need Help!

    To start with I'm going to keep the names of those involved out of this post for now. Here's what happened: A good friend of mine had been looking at buying a Viper for some time. He's never owned one before and only knows what I've told him and what he's read from this site. An excellent tool...
  10. V

    So what could it be ? a POP every once in awhile from the rear end ?

    I've heard it four times now and I can't find anything wrong :mad: Everytime it's happened I've been either backing up stopped then starting forward or stopped and making a sharp turn to the left. It "POP"s and feels like I ran over something. The "POP" is hard enough I feel it. Only thing...
  11. V

    Would you take delivery of your Viper after seeing it like this ?

    The delivery driver said the top was flapping so he did this
  12. V

    First time to the track this year

    In the 10's first time out this year - Check out the video I'll let the Video speak for itself YouTube - 1996 Viper RT10 at the Drags I know it's not the fastest by some of today's standards but not bad for my first time out this year and it's a GenI :D I had a throttle cable that kept...
  13. V

    My Old Gen I getting some respect

    Ran this in my 1996 RT10 last Saturday Not bad for an all motor Nitrous car. I think with more seat time I can cut it down to a mid and or better yet low 10's. Running MT ET Streets with 15lbs of air. I had one 60' of a 1.49 What a feeling those 60's give ya ! Video to be posted soon
  14. V

    Anyone have a set of Unitrax Half shafts they want to get rid of ?

    I was getting ready to buy a set and wondered :hmmm: if anyone had a set laying around. Maybe someone here upgraded or ? :drive:
  15. V

    Gen I owners: Anybody out there install a aftermarket steering wheel?

    One that bolts right into place? and retain the stock horn (not asking much am I ?) No adapters either if it can be helped. My car is close to 40K and I just noticed a very small spot of wear on my steering wheel (Bright Blue). It's where I rest my left thimb on the wheel. I want to put an...
  16. V

    Can coil packs have an intermittent problem?

    I’ve just developed this miss that I can only best describe as a cut out. Kind of like a having a bad spark plug wire but only worse. It’s definitely more than one cutting out. If I throttle up fast I get this miss but if I throttle up slowly. No miss? I’m now thinking coil packs but I always...
  17. V

    Just how much HP can the stock clutch handle before it's time to upgrade?

    I think I know but I want to hear from the experts. Here's why I'm asking For the first time I think my stock clutch is slipping and it's only slipping I think under the spray. Oh by the way it's a Stock (LUK?) with only 3k miles on it. I was back at the track the other night and the car ran...
  18. V

    OK Drag Racers! Riddle me this......

    I’ll explain in detail below but to save time reading for most of you I’ll just ask the simple question…. How can I run a 11.67 @ 125.05 on all motor and then give the car 150 shot of NOS and it only runs 11.33 @ 134.68 I gained 10 mph but only .3 ET? The track was pretty good and for the...
  19. V

    Anybody need a set of Edlebrock Heat Shields ?

    Only two days left so..... http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=015&sspagename=STRK%3AMESE%3AIT&viewitem=&item=250105146455&rd=1,1 They are Edlebrock Part # 6700 and they cost $275 new.
  20. V

    OK NOS experts-installing a NX on my Viper - I need to know

    What plugs are best? ( I know two steps colder) My factory ones are Champions RC12LYC. I swear every auto parts store I called can’t tell me what two steps colder of this plug is. Is it a RC10LYC? Or anybody have any other suggestions. I’m also running a FJO mini progressive controller that I...
  21. V

    GenI Stroker Kits? Are there any out there? Need Info Please

    I want to look into this as an option. My car is currently not stock. It's a GenI of course and for the most part it is what I will call a GenI that has been GenII-ized (lack of a better word). Bottom end is stock and I'm running the 708 cam (Harland Sharp RR's). I've had some head work done...
  22. V

    Short Throw Shifter ! My 2nd most favorite Mod !

    I don't see many people post or praise the mod but I just recently bought and installed one. :D WOW ! :D Where have I been! I bought SVS's brand and all I can say is what a difference it is. I knew of the throw theory but their design makes it almost impossible to miss 3rd. It's spring...
  23. V

    My Battery is dead ! What to buy? Are Optimas worth it? and do they fit ?

    I bought my 96 in 2001 and had to buy a new battery then. Now 5 years later mine is finally dead (almost). I replaced it back then with a factory battery. No complaints here since the life seems to be 5 years. I'm tempted just to go back to the dealer and get another factory one. My good friend...
  24. V

    Replacing the Center Speakers on a GenI - What do you think?

    I've been wanting to do this for some time now. The stock speakers have always looked cheap and I know it's mostly due to the covers. :smirk: I chose these Infinity Kappa speakers. Mostly due to the look and design. What do you think? It's only the grills but I wanted to see how they...
  25. V

    Have you ever been asked"How many Vipers to Vettes?" some interesting info

    Have you ever been asked\"How many Vipers to Vettes?\" some interesting info Have you ever been asked “How many Vipers were made?” or “How many Vipers were made compared to the Vette?” I’ve been asked that more than once. I’ve never been able to answer it other than “ I don’t know, I know...

Latest posts

Members online

Total: 779 (members: 8, guests: 771)

Forum statistics

Threads
153,200
Posts
1,681,922
Members
17,698
Latest member
Tombala

Share this page

Top