Search results

  1. A

    Where can I find a high/low fan relay? 95 Viper

    My low speed is no longer working. High comes on fine, and fans also come on with AC. So I wanna try replacing the relay first. My local Dodge dealership said the part is discontinued. So does anybody know where I can pick one up? Didn't find anything at viper parts of america site. The part #...
  2. A

    Problems with aftermarket speedo calibrators?

    I got gears so I have a speedo calibrator under the dash. My last one was really old and last year it started failing on a regular basis. I assumed it was heat related since it was after a while of driving and it gets pretty hot under the dash. The speedo would read 0 until I let it cool...
  3. A

    Slight banging from floorboard. Please advise.

    Just in the past week I've begun to notice a slight banging I can feel in my feet on the floorboard and hear. I generally only feel it at idle and mostly on cold startups. And I really get a good bang when I shut the car off. Engine or Tranny mounts? I was planning on doing poly mounts...
  4. A

    My pics from Bob's BBQ.

    Here's the actuall race car. Race car and street car side by side. Pics of the street car. Few shots of Bobs Garage(s) Helicopter Shots And Shots of all the Vipers attending. Guy said these wheels cost $10k.
  5. A

    Gretna Days, July 18th.

    Anybody else going to the Gretna car show?
  6. A

    What the heck did my car just do?

    So I was having some fun with the car and basicly did a 1/4 mile run at WOT. In 3rd gear I felt a slight hesitation at like 5k rpm. Went into 4th and again at like 5k rpm had a huge hesitation, felt like the car fell on its face. So I put in the clutch and went to nuetral and come to a stop...
  7. A

    2 Gen I with different mods

    So I got Belanger Headers, no cats, roe mufflers, VEC2, ported/milled heads by greg good, and 3.73 gears. 1995 Gen I. It was a crappy day for dynoing. 3% correction factor. Put down 430rwhp/480rwtq. My buddy Max has a 93. Same exhaust all the way. Now he has stock heads. But he went with the...
  8. A

    HIPO Car Show Pics

  9. A

    Car cut out at high rpm?

    I thought I'd just throw this up here since I get a little worried when anything out of the ordinary happens. But today I had the A/C on (if that matters), and I got on it a bit and was at wot in 1st gear then went to 2nd and I was at about 5700rpm I think in 2nd about to shift and it felt like...
  10. A

    Rev limiter on Gen I?

    Can anybody tell me what the stock rev limiter is on a Gen I?
  11. A

    Dyno Day! May 30th in Lincoln!

    Were throwing in another event folks! For those of you who are interested in what your cars exact horspower is, this event is for you. We'll be dyno'ing our cars at Dynosport here in Lincoln. They use a "dynojet" dyno. Start time will be Noon on Sunday May 30th. Its $50 and you normally get 3...
  12. A

    Viper running hotter after Head work?

    1995 Viper. So I just got my car back with some Greg Good heads on her now. Tuned it and everythign today. Everything went smooth. Car feels great. Only thing is, twice today when driving around and in some stop and go traffic the temp gauge got a little higher then normal and hit the dash...
  13. A

    Dyno results. Greg Good heads, Gen I.

    Car also has Belenger headers, roe racing mufflers, cat delete, 3.73s. Heads were ported, polished, and milled. Peak #s were 390rwhp, 432rwtq. This is on a Mustang dyno. This one is typically 10-15% lower then a dynojet. Previous #s were 360/427. So a pickup of about 30rwhp, and 5rwtq. But as...
  14. A

    HIPO Car Show. May 15th. Omaha.

    Who's all going to this show? I hope to see TONS of Vipers there!!!
  15. A

    Gen I cam specs?

    Google is not my friend today. Can anybody post up or link me to what the cam specs are on a stock Gen I?
  16. A

    What do I need to upgrade to run nitrous?

    I got a Gen I car and I'm thinking I MIGHT decide to run nitrous down the road in a couple years. I've ran it on my LS1 so I know all about nitrous. I'm just wondering if any internals will need to be upgraded on my Viper. I don't wanna have to go back and spend time and money to backtrack...
  17. A

    New member

    Finally took the plunge and joined the VCA. I just wanted to thank blknblu for taking the steps to bring the Nebraska community together!
  18. A

    WTB: Winter Coat

    Anybody know where I can find a nice heavy winter coat? Viper logo of course.
  19. A

    Just got dyno #s for my Gen I

    I was hoping for at least 410 with my mods but didn't quit get it. Seems a bit low to me I dunno. I got belanger headers, no cats, roe racing mufflers, smooth tubes, K&N Filters, and gears. Seems like Gen I guys with the same mods but no headers are pulling better numbers. Put down 400rwhp...
  20. A

    Tip for anybody with a "Last 300" car.

    If your car is like mine your stamp is dirty and faded. I was trying to figure out how to make it stand out more and catch peoples attention at car shows or whatever. So I took some white acrylic paint and rubed it all over the area. Then worked it in the holes with a paper towel. I then...
  21. A

    Just got Mustang Dyno #'s for the Viper.

    I got a Gen I. Mods are headers, no cats, roe racing mufflers, smooth tubes, gears. Put down 362rwhp, 448rwtq. Dyno operator said he normally sees his #'s 15% lower then a dynojet. Which I can verify. I used to have a SRT8 Charger. Put down 323 on his mustang dyno, and it put down 378...
  22. A

    What about Kumho XS Tires?

    I'm pretty happy with my tires I got. But at 3k miles, there pretty beat up. I got Kumho Ecsta V700s. So even though I got tread, with all the heat cycles they've been put through I'm worried the compound is now just getting harder and harder and my traction will suffer. The tread rating is...
  23. A

    WTF? Car keeps dying...

    This happend a couple weeks ago and didn't think much of it. But now it seems to be re-occuring. When at WOT today and shifting from 2nd to 3rd the car died as soon as I let out the clutch and gave it gas. I tried it 3 more times and the same thing happened. Then I tried letting out the clutch...
  24. A

    Anybody do a mail order tune for Gen I?

    So I just got headers on my car and was thinking about shipping the PCM to DC Performance for a tune. Cost is $600. The guy who runs the local dyno I went to didn't think they could squeeze any more then 10hp out of it and didn't think it was worth the money. My A/F's are pretty good. 13.0...
  25. A

    Anywhere to tune in Kansas City?

    I was going to post this in the Kansas City regional forum but apparently I can't since I'm not a VCA member. But anyway, I got a Gen I and am soon to be doing headers, no cats, new mufflers. I was planning on just doing the DC Performance mail order tune. But now am wondering if I want to...
    • Alley
    • Thread
    • Replies: 5
    • Forum: Gen I

Latest posts

Members online

Total: 824 (members: 9, guests: 815)

Forum statistics

Threads
153,199
Posts
1,681,913
Members
17,696
Latest member
Viper123456

Share this page

Top