Search results

  1. T

    Anyone need 2" seat lowering brackets?

    I have a set off my GTS, I want $90 shipped. Bought these from parts rack 1.5 years ago, used for 1700 miles, great condition. Email me at [email protected], I don't get on here much. Thanks!
  2. T

    Passenger door pops open after getting wet...

    Sometimes when I wash my car the passenger door opens by itself for several hours afterwards. Obviously the water is getting in something and shorting it out, but what? I first thought it was the wiring going to the door, but that was bone dry after washing yesterday. This time not only did the...
  3. T

    What type of epoxy/glue to repair fascia?

    I have cracks on both sides of my front fascia down low where the protective tape is from dodge, about 5 inches in from the edge. Many Vipers I've seen have the same cracks from scraping on driveways. I want to use something to glue or reinforce the cracked area. I was hoping to be able to put...
  4. T

    Drivers side front of hood keeps popping up

    I can't figure out why this is happening? The front of the hood on the drivers side keeps popping up. It sits right if you push on it, but once you drive it it pops up enough to put a good gap between the headlight and hood. I don't see anything hitting it, maybe theres an adjustment?
  5. T

    Doing timing chain cover gasket, any tips?

    I started tearing into it tonight (30K mile 1997 GTS), have all the gaskets already. I know the balancer bolt gets torqued to 250 ft. lbs. I will have to rent a torque wrench for that. I have a new crankshaft seal, I ASSume I can just drive it in with a socket? I took the cross brace loose...
  6. T

    Doing aluminum radiator, should I swap the stat?

    I'll be installing a aluminum radiator soon, should I change my thermostat too? I know its a bitch to get to. I've been doing some reading and I'm not sure how good it is for the engine to run at 180 degrees, seems like 190-195 would be better. Right now I would just like for it to cool off...
  7. T

    My public "thanks" to a couple guys...

    I am relatively new to the Viper scene, having just bought mine in October, but I have learned alot and would like to thank the guys who have taken the time to help me out: Joe Donavin, of PBJ, has been the number one guy. He checked out 2 Vipers for me and if not for him I'd probably be...
  8. T

    Looking for 335/17 Kumhos or drag radials

    Don't wanna spend the coin for new ones, just need them for occasional traction needs. Anyone wanna part with a set?
  9. T

    What should I buy? Headers, gears, or ??

    My 97 GTS is mostly stock aside from smooth tubes, K&N's, no cats, hi flow mufflers, and a B&M shifter. What would gain me the most ET reduction for about $1K? Headers, gears, or? I'm going back and forth on a nitrous setup, which I already pretty much have on the shelf. Help me out! :dunno:
  10. T

    Stock plugs Ok for a 100 shot of spray?

    Or do I need a colder plug for such a small shot?
  11. T

    Scan tool?

    Is there some sort of scan tool for my 97 viper? I want something that will read all the engine sensors. In my Camaro I have a "scanmaster", which is a small box like a radar detector that can display alot of info and reset codes. I'd love something like that for the Viper.
  12. T

    Roe S/C users: Did you need to upgrade the cooling system?

    I'm debating buying a Roe S/C for my 97 GTS but as is the car runs warm. I plan to install a lower temp stat and a fan switch, but with the blower will a radiator upgrade be mandatory? Also will the aftermarket aluminum radiators accept my stock fan?
  13. T

    Best place to pick up ign. power near PCM?

    Hooking up my shift light and figured it would be easier to just wire everything right there. Anyone know which wire to grab?
  14. T

    Closest place to Illinois to get MGW first strike knob?

    Need one asap, who's got one closest?
  15. T

    Home made clutch lowering kit....

    I know Roe sells a lowering kit, and if he were local I'd run over and buy one, but I am doing a bunch of stuff to the car tomorrow and would really like to knock this out while I'm in there. I know its just a metal bar with holes in it, can someone give me the measurements please? I'll order...
  16. T

    Anyone trimmed the lower lip of the fascia?

    My 97 GTS has the typical crack about 3 or 4 inches in from the edge of the lip, like that when I bought it. Here in Illinois the roads suck, the driveways can be steep, and it does get scraped from time to time. I thought I read somewhere that some guys have trimmed an inch or so off the...
  17. T

    Proform shift light users...

    I ordered one of these today, couple questions: Where do I pick up a tach signal? Also, I know I'll have to cheat the numbers a bit for the V10, but any idea where to start? Like, what equals 5300 RPM?
  18. T

    Shifter install easier from top or bottom?

    Hey guys, I'm installing a B&M shifter in my 97 GTS this weekend and I've read a bunch on here (search button keeps me from having to post much) but I see two ways of installing the shifter and want to know which is easiest? I hate jacking this car up, so if it can be done from the top I prefer...
  19. T

    Advice on 98 GTS purchase please...

    I'm looking at buying a 1998 GTS, silver, with 31K on it. It has a "Venom 555 package from TNT motorsport", supposedly 556 RWHP on a rebuilt engine. I haven't physically seen the car yet, I'll be going Wednesday to check it out. The Carfax is clean, its a one owner car. The previous owner dumped...

Latest posts

Members online

Total: 1,048 (members: 4, guests: 1,044)

Forum statistics

Threads
153,241
Posts
1,682,296
Members
17,736
Latest member
Rot8te

Share this page

Top