I have a P0161 fault that is showing 2/2 sensor heater bad. Where is the Bank 2 sensor located? Driver or passenger side? I know its the downstream after the cat sensor, but not sure if its driver or passenger side?
Thanks...Rich
I trying to confirm if I have a bad oil sensor and am looking for a place to hook up my oil pressure test gauge. I know I can remove the sensor and connect there...but it is in a real tight place to remove the sensor and was looking for an easier access point to test with the test gauge...
Wanted to check with others to see if anyone has replaced a bad cooling fan before? I am noticing that when the oil gets to around 200 deg on hot days Im hearing a loud noise (Bearing?) from the fan area. Also when I increase RPM it also gets louder. Also most like it follows with the oil...
Looking for anyone who has already replaced their power steering lines that has a paxton installed? Want to know if I need to remove any of the paxton or the paxton water cooler to acccess the fan line connections?
Thanks...
Rich
I noticed a small amount of oil under the car over the past month and found that the oil return line that comes off the paxton is seeping a small amount of oil at the fitting that goes into the supercharger.
The instructions say not to use teflon tape on the threads, but is there a big...
Since I’m changing out my transmission for a TR6060 soon on my Gen 3, I want to change out the Clutch / Flywheel as well. Will also be changing out the Slave Cylinder / Throw-out bearing.
I’ve looked at several options (BBG, SPEC and several others). Wanted to know what others have...
Anyone have a line on who has decent deals on a TR6060 Transmission to replace my Gen 3? Ill be getting the conversion kit from VPA.
Not sure I want to go with an upgraded G-Force yet, but may be an option.
Thanks...
I have had a slight vibration at around 2000-2400 RPM since having the Paxton installed. Ive read some other emails regarding a Damper. Is this the fix, or do I have another issue? Or is this nornal for a Paxton SC install?
Thanks...Rich
I started to hear a thump some times when I'm sitting at a light in neutral then shift to first with the clutch in. Thoughts on what it is? I just recently had a new rear installed with wavetrac insides. Maybe the installer didn't install u-joint bolts correctly?
Thanks....Rich
Here is a pic of my 05 vert with my new H-Spoke Chromed wheels. Thought it turned out well....even had the guys inlay the SRT logo on the wheels red. Pic is also before the new 08 CF Hood that is being shipped. Wheels done at CalChrome and those guys did a great job..! Pic of the wheel is...
Well...changed the oil in my 2005 vert and all went as the past changes went. When installing the filter I normally tighen by hand then with a 1/4 turn with the filter wrench. This filter seemed like it took more turns to get it seated...but didnt think anything of it. Filled up with oil...
Iver looked at several documents on the web, but still a bit confused on where and how to fill the water levels in a Paxton NOVI 2000 SuperCharger?
Also..How do I know when I need to add wather? I did find the mixture needs to be 25% Anti-freeze to 75% water.
Thanks..
Rich
Had my 2005 vert out a few times this past month since its warming up here in Reno. What Im noticing is when I first start to move and take a sharp turn shortly after first moving Im feeling like one of the back tires may skip. Almost like the posi is sticking or something.
Is this normal...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.