when I had the Valentine 1 installed, the sparky used a 'spare' switched relay in the fuse box to save cutting into wires, dont ask which one it was though.
thanx....now since I am not that bright with electrical matters....how do I tap into the fuse. What little trinkit do they make that I can hook another wire into that fuse?
You'll need a small fuse tap. Basically you plug the fuse into the tap and then plug the tap into the fuse slot. The positive (red) wire attaches to the fuse tap. Should be less than $1 at auto parts store.
Or, you can do the sloppy thing that I do: remove a fuse, take a wire and wrap it around one of the legs of a fuse, and then stick the wire and the fuse back into the fuse panel. Instant connection!
Use the Littel Fuse - "Add-A-Fuse". This is a piggy back device that plugs into an existing fuse receptacle. In affect it turns a single fuse into a two fuse outlet. There are several fuses in the interior fuse block location that are either switched on at "Key-On" or "Engine-On".
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.