Steve M
- Posts
- 1,139
- Reaction score
- 251
Latest activity Postings About
-
-
Steve M replied to the thread Clunk in the Trunk :).240 ft-lbs is what I've used. -
Steve M replied to the thread Drivetrain Whine.In my limited (but relevant experience), once you develop differential whine, nothing short of a rebuild will get rid of it. Many...
-
Steve M replied to the thread Battery Tender.
-
-
Steve M replied to the thread Clunk in the Trunk :).What is your ability to get under the car, get the belly pan off, and start poking around yourself? Could be mounting bushing related...
-
Steve M replied to the thread Gen 3 Differential Repair / Replacement Advice — Spider Gear Failure.It might be worth reaching out to shops like Nth Moto, Calvo, or Havik Performance - they do a lot of Viper business, and although Nth...
-
Steve M replied to the thread Gen 3 Differential Repair / Replacement Advice — Spider Gear Failure.Glad someone found my write-up useful...that took more time than I'd care to admit to accomplish. My advice: skip anything that...
-
Steve M reacted to Goggles Pizano's post in the thread Question regarding Viper oil filter. with
Like.
So they took the same filter used on a bunch of different cars both mopar and non mopar and stuck a paper label that 10x the cost. -
Steve M replied to the thread Question regarding Viper oil filter..I've seen this pop up multiple times in different Facebook groups - general consensus is that it's legit and likely a supplier change.
-
Steve M reacted to viper19upj's post in the thread Planning Ahead for a Gen 4 Viper Purchase with Like.
Steve, Thank you for taking the time to provide such a detailed response. I really appreciate the insight, especially regarding...
-
Steve M replied to the thread Planning Ahead for a Gen 4 Viper Purchase.Most of us that have been in this game a while could write a chapter book on different things to watch for, common issues, etc., but...
-
Steve M replied to the thread Custom gauge test.I do like white a bit better, but props to you and lots of respect for taking the time and effort to pursue this project. It's very well...
-
Threw it all back together. Not everyones cuppa tea but I think it came out neat. I have a spare set of gauge faces I'm going to use on...
-
Steve M replied to the thread Off idle stumble and misfire 08 Coupe.Just glad it was something fairly simple and that it is back up and running like it should be. It takes a village to keep these cars...
-
Steve M reacted to Loren jones's post in the thread Off idle stumble and misfire 08 Coupe with Like.
Yep, for sure, lessen learned, slow down, double check everything.
-
Steve M reacted to Loren jones's post in the thread Off idle stumble and misfire 08 Coupe with Like.
Well, I'm an idiot. Cylinder 7 had a cracked plug. Should have checked them when I cracked the other one. She rips now!! Thanks @Steve M...
-
-
Loading…
-
Loading…
Latest posts
-
-
-
-
-
-
Turning gauge cluster plastics back to white- Latest: Viper Specialty
-
-