Recent content by EastCoastSRT10

  1. E

    Submissions to the "Viper Parts Vendor Directory"

    Would be nice to find a shop closer to DC/Virginia. Right now there is a dead zone between Havik in PA and JTSV in NC.
  2. E

    Rear toe change per turn?

    Thanks! That actually helps alot. I think the last shop gave me toe out instead of in which made the car super unstable in tight turns. I know what the specs they aligned it to so with some math can figure out about how much to bring it in. I should have 1/10th of an in Toe Out so 1 turn would...
  3. E

    Rear toe change per turn?

    Gen 3. I looked in the manual and I can’t find where it specifically states the change in degrees per turn. I guess in theory there is no need to know since you would measure it as you adjust to get where you want. I’m just having a rough run with getting any sort of work done for the Viper...
  4. E

    Rear toe change per turn?

    Anyone know what the rear toe change is per turn on the stock toe link is by any chance?
  5. E

    Cheap car recievers with android interface on ebay/amazon

    I have an ebay one. Been working fine for the last couple years. Only real issue is if you’re using wi-fi or bluetooth for carplay or android auto it’ll lose connection from time to time. I think if you install the USB port it should solve that but besides that one complaint I haven’t had any...
  6. E

    My Viper continues to hate me

    As far as height goes you’re going to want about 4.5” from the frame to the ground right behind the front wheel well. I was scraping on steep inclines/declines at 4” but not as much at 4.5”. Rear height will depend on how much rake you want and what generation car. I think gen 1 and 2s can run...
  7. E

    Tapping noise

    I have not. I would have to see if I can get the stethoscope on the bell housing but good call as I’m at a lost. Would be a very weird noise for a throw out bearing. I also don’t feel anything in the shifter that I can tell. The noise starts right at start up with the clutch pedal in though.
  8. E

    Tapping noise

    Just an update. So it’s not an exhaust leak. I checked everything was tight on the exhaust. No signs of leaks. I don’t see any cracking on the headers. Redid the exhaust mounts thinking maybe something was loose. The only thing is that over the winter the tapping can no longer be felt in the...
  9. E

    JTSV and Havik Still in business?

    Thanks all. I'm used to reputable businesses responding to internet inquiries and when they don't or stop it's usually a sign of bad things. However, they do have good reputations on this site so I wanted to double check if anyone knew anything.
  10. E

    JTSV and Havik Still in business?

    Anyone know if either of these two shops are still in business? Haven't been able to get a hold of either shop via multiple emails. JTSV owes me a throttle body and I was looking to get some work done at Havik but neither shop responds to my emails.
  11. E

    carbon fibre bonnet - stay arm

    Why not just get lower pressure struts?
  12. E

    Clutch issues during longer drives

    Yep, Bleed the system. Mine did the same thing when the clutch fluid was contaminated with water.
  13. E

    MD new VOIx owner

    Mine gets mice nests over the winter on top of the engine block also. Not sure why they love that area so much.
  14. E

    New Gen III owner

    I have the android/carplay head unit in my Viper. A little slow but does everything I need which is mainly NAV and music.
  15. E

    Window Regulator -GEN 3/4 Archilles Heel

    Did you get the upgrade kit from Jon B? It would save the headache of future failures.
See more

Latest posts

Staff online

Members online

Total: 1,060 (members: 4, guests: 1,056)

Forum statistics

Threads
153,836
Posts
1,686,656
Members
18,447
Latest member
naimsito

Share this page

Top