-
-
Nnismoflip replied to the thread Coolant in between intake runners.Thanks all. Gives me a starting point.
-
Nnismoflip reacted to David Buchesky's post in the thread Coolant in between intake runners with
Like.
The Gen 1's often leaked at the joint of the crossover for the thermostat where it connected to the cylinder heads. Later cars had an... -
NRemoving the wipers (flip covers & 2x13mm nuts) and cowl (4 phillips screws) will let you see and get to what's at the back of the engine,
-
NItis a PIA, but you can take off the thermostat crossover without taking off the manifold. It is a lot easier to see what is going on if...
-
NThe heater core should be on that side as the lines from the radiator to the core.
-
NHeater core should be on that side of the fire wall. Look for the leak there.
-
NLeaking coolant towards back of engine on my gen 1. I see coolant between the runners looking down from the top. What’s back there...
-
-
-
Loading…
-
Loading…
