Recent content by nismoflip

  1. N

    Coolant in between intake runners

    Thanks all. Gives me a starting point.
  2. N

    Coolant in between intake runners

    Leaking coolant towards back of engine on my gen 1. I see coolant between the runners looking down from the top. What’s back there? Thermostat and some cooling lines? Any tips before I start taking apart the intake manifold? Thanks in advance
  3. N

    Door Seal/Weatherstrip

    Here’s a used left side one: https://www.ebay.com/itm/275926472725?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=Ss0XJLXWSTe&sssrc=4429486&ssuid=WHbJ4WiWSsW&var=&widget_ver=artemis&media=COPY
  4. N

    Sketchy freeway driving

    Just an update on this. One of the inner tie rods was toast. Bellows was torn, gunk what looked like metal shavings mixed with grease and dirt was all over ball, and tons of play. Not so much the other side but replaced anyways of course. Took it to Viper shop for alignment. Everything all good...
  5. N

    Sketchy freeway driving

    Thanks all. I’ve ordered the inner tie rods and will be looking to get those endlink boots replaced. And of course the wheel alignment. Will post back on results.
  6. N

    Sketchy freeway driving

    My Gen 1 that I’ve owned for 3 years has always been sketchy driving on the freeway. Seems to do okay on surface streets. It’s hard to describe other than it seems like the car wants to track with the ruts on the freeway and the steering wheel feels damped and vague (not connected). I’ve got...
  7. N

    WTB VEC2 wiring harness kit for Gen 1

    Looking for the Vec2 wiring harness adapter kit and instructions for my Gen 1.
  8. N

    WTB these parts for my Gen 1

    Looking for: Edelbrock headers Radio bezel Door bezel surround, drivers side Stanchion back cover, large hole, drivers side Hood grills, both 65mm Accufab throttle bodies Seat lowering kit Headlights :)
  9. N

    Looking for Gen 1 or 2 hardtop

    Looking a hardtop for my 95 RT
  10. N

    WTB passenger headlight for 95

    Lemme know what you have Thx
  11. N

    Looking for a Gen 1 Top..

    Granger73, I ended up buying the Gen 2 hardtop. It installed fine and mated up with Vipermania windows really well. Not a rainproof seal to the windows by any means, but certainly no worse than the windows and soft top seal.
  12. N

    Looking for a Gen 1 Top..

    OK thanks Granger. So it sounds like I either need to look for a 96 hardtop or an aftermarket hardtop specifically made for Gen 1s.
  13. N

    Looking for a Gen 1 Top..

    Hi. Will this fit my 95 without modification? https://www.ebay.com/itm/NEW-OEM-NOS-1998-2002-DODGE-VIPER-GEN-11-REMOVABLE-HARDTOP-SW18MX3AA/143165156995?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649 It sounds like 92-93s would need different pins but I should be okay with my...
  14. N

    Polish light scratches on Vipermania windows

    I have a pair of Vipermania windows with some light scratches. Nothing fingernail deep. Any recommendations on what to polish them with? I believe their material is lexan and they are tinted from the factory. Is hand polishing okay? Or is orbital recommended? Thanks.
  15. N

    New owner. Couple of questions

    Haha. No I used to have a Z32 TT many years ago. Got tired of throwing money at it. Wanted to go ‘murican this time :)
See more

Latest posts

Members online

Total: 886 (members: 6, guests: 880)

Forum statistics

Threads
153,836
Posts
1,686,656
Members
18,447
Latest member
naimsito

Share this page

Top