J Dawg
I had major misfire problems when I bought the car new. The first was at about 450 miles and was a 5 cyl. misfire. It happened about 3 times more after that. Not to drag on, it turned out to be my pcm. Once changed, never a problem again.
As far as the new colder plugs, not one issue. I...
I am running an NX 200 shot on my creampuff. But I did finally end up going with colder plugs and a tighter gap. When the nitrous comes on it feels very strong now. Before, I had the same shot without changing the plugs or gap and did not feel the nitrous at all. The change was worth almost half...
Re: [******] HELP
Hey Everyone,
I feel for you as well, and also believe this post should be up top. I almost made the mistake of ordering from him, but thank goodness I did not. All of you are right, he should be put out of business. :mad:
Hey AlvaSpeed,
The fuel inlet of the nozzle has a 22 jet in it for the 150 shot along with the N20 41 jet. My nitrous tech told me we can go with a 20 jet and it would lean it out. Of course, I am fortunate that there are plenty of dynos here; so I can change the pill and check it right away...
Hey SunDiego,
Must be nice having West Cost near by you, right. I am just waiting for my full exhaust from Belanger to dyno the car again and send my computer with dyno sheets to Jason. My computer needs tuning pretty bad even of juice it goes rich. I know that is normal for the Vipers but...
Hey Jack B,
Understood. I asked my nitrous guy about the advertised 300 shot versus the real shot. He told me that the solenoid in the kit is good up to the 300, maybe a bit over that. He said though, that the line from the bottle to the solenoid(included with the kit) would only allow up to...
Hey Bo,
The kit comes with a microswitch that when the throttle bodies are fully open it manually depresses the switch. And inside the car is the main switch on or off. You can either turn the main switch on and once you are full throttle the nitrous engages or be racing down the strip at full...
MiamiJeff is right. Brian is the owners son. He is a nice guy, but I went to talk to him about the car(Mamba); and he wanted to sit me with his General Manager. But in retrospect I would give him a call, the car is still there and has been for a while. Good Luck.
Hey Jack B,
I believe Sun Diego and I have the same kit(except he has more goodys). My car will be done tomorrow and I will ask my mechanic those specific questions. What I do know is the kit is wet, so the nozzles have a 2(nitrous in and fuel in) to 1 into the polished smooth tubes. It...
Hey AlvaSpeed,
My NX wet kit ranges from a 100-150-200-250-300 shot, all jets are included. The maximizer is definately an awsome accessory for this kit. But as Sun Diego said you (and I ) will need to get use to it b/f we can use it. I talked to my mechanic and it should be ready for pick...
Hey AlvaSpeed,
I have the exact mods you do. None. Hopefully tomorrow by NX wet kit should be done, I'm going with a 200 shot. As per faq page on NX, the recommended shot is about 20 per cylinder without need for timing retard or regapping the plugs. I am going to take the car to the dyno...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.