Search results

  1. Ron

    IN/KY VCA Tech Session...Tom Sessions...6/9/07

    Boxer, Not sure where I acquired. Will dig into the archives and let you know.
  2. Ron

    My doors are falling off.

    Smells like an aftermarket opportunity.
  3. Ron

    Attention: 1996 GTS Owners

    Jon B probably knows more about 1996 GTS's than anybody. I'd drop him a line.
  4. Ron

    IN/KY VCA Tech Session...Tom Sessions...6/9/07

    I can see through your cheap attempt at a bump...... Is north a left or a right?
  5. Ron

    IN/KY VCA Tech Session...Tom Sessions...6/9/07

    This was one of the most popular IN/KY VCA events of 2006! We'll have each of the three generations up on lifts and Tom will go over the differences and improvements through the years. In addition, he'll be discussing proper maintenance procedures, performance tips and tricks, safety issues...
  6. Ron

    What did I do wrong bleeding my brakes??

    Thanks Craig, I will do so. Thanks for the help! Ron
  7. Ron

    What did I do wrong bleeding my brakes??

    You know 44, my memory of it is that I did. If not, Craig gave me the phone number of Miller and I ordered it directly through them. It's been years....... Miller's number is 1-800-801-5420
  8. Ron

    What did I do wrong bleeding my brakes??

    I got mine from Craig 95VIPER. He makes a quick connect kit for the Motive unit. http://www.hipoengineering.com/MotiveBleeder.asp
  9. Ron

    What did I do wrong bleeding my brakes??

    Hi Craig, I in fact bought mine from you so I'd be happy to send it back for you to analyze. I love the concept but have gotten tired to hosing brake fluid off my side sills! :omg: Are you still at the same address? Thanks
  10. Ron

    What did I do wrong bleeding my brakes??

    My guess is that the master did get too low as I can't see any other way for air to get in. Also, if the fluid is agitated, either by shaking the bottle or by a rough pour into the master, air will be introduced into the lines. I also use this method and while a lot of air leaks around the...
  11. Ron

    Portable GPS Units

    Because windshield mounting does limit visibility somewhat, I used my Garmin unit with an external antenna. Antenna sits on the rear bulkhead under the rear glass and the unit itself on the console with the sandbag mount. Works for me. Side note: The Tom Tom I used was unviewable in direct...
  12. Ron

    Blowin Air Harder (airconditioning)

    If you open the hood and put your hand above the airbox while the blower is on high, you'll see the flow is pretty darn strong. Perhaps insulating the engine side exterior of the airbox to minimize heat infiltration would help?
  13. Ron

    What's the difference between '97 and '98?

    Just to add to the confusion, early 1997 GTS's still had the 1996 style cast 17" wheels. Somewhere along the line, later 1997's went to forged with a better polish and the 1998's were even better (shinier). I upgraded to 1998 wheels just in case.
  14. Ron

    Are you curious how Dex-Cool performs in a Viper?

    I changed to Dex-Cool within months of purchasing my new Viper because (in order): I wanted the water pump to last longer. I wanted to take advantage of the lastest in coolant technology, including better thermal transfer. I hate changing coolant (almost as much as ATF changes) and wanted to...
  15. Ron

    Stock Amp Adjustment?

    My understanding is no. It in fact limits the frequency range that goes to the subs so even if you install a pair of nice JBL subs in place of the cheaper stock rear speakers, it doesn't sound any better. Others know more that I on this subject, but IMO a full transplant is required for...
  16. Ron

    '96 GTS wheels/rims

    Re: \'96 GTS wheels/rims Street tires "not much" means that with the limited adhesion of stock sized street tires the stresses generated are "supposedly" below cast wheel failure, hence no recall. I personally wanted the stock look but the piece of mind of forged wheels and bought a set of...
  17. Ron

    '96 GTS wheels/rims

    Re: \'96 GTS wheels/rims Street tires, not much. Slicks, not allowed. Not sure if 1996, early 1997 cast rims (also cast) are even allowed on the track for Viper Days.....
  18. Ron

    What kind of exhaust is it?

    It's a 2.5" Corsa system. I have the same, but cut off the tips and welded in stock ones that I had chromed. The Corsa oval tips look pretty fugly to me, however happy to sell them to anyone that wants to impersonate a Corsa look.....
  19. Ron

    What is the stripe width on a GTS?

    Which for the 1996 GTS equals 8.2283" wide each with a gap of 3.937"
  20. Ron

    Stupid question about rain

    The hood air vent for HVAC use (passenger side) drains into the HVAC airbox and then into a small diameter hose at the bottom of the airbox. Torrental rain over a period of time will overwhelm this hose and ultimately flood the passenger footwell. Happened to most of the Vipers at VOI7 in...
  21. Ron

    96' RT/10 factory headers vs. 02' RT/10 factory headers

    Re: 96\' RT/10 factory headers vs. 02\' RT/10 factory headers Saves 23 lbs and adds no power. Dyno proven.
  22. Ron

    crack in instrument panel!!!!!

    Would love to see a picture of the damaged area if possible.....
  23. Ron

    replacement outer weather stripping

    Worse, on early GENII Vipers, Dodge requires that you buy a new side window that is slightly smaller as the travel of the window slightly exceeds the weatherstrip length. If you catch it early it can be easily repaired but by the sounds of it perhaps it's too late. A search will show you how...
  24. Ron

    valentine 1 hardwire

    - This might help -
  25. Ron

    BIG oil pressure problem

    Great Alex. Post your Blackstone results when you get them. Will be curious to see how it compares to other V-10's.

Latest posts

Members online

Total: 945 (members: 5, guests: 940)

Forum statistics

Threads
153,839
Posts
1,686,670
Members
18,448
Latest member
JpKL

Share this page

Top