Search results

  1. T

    998 recall

    The best way to get me is at 910-228-8477.This is my cell.I am not always at the dealership so this way I am sure to get the message.
  2. T

    NOW THAT I'M OUT OF WARRANTY,BEST OIL/FILTER TO USE

    Re: NOW THAT I\'M OUT OF WARRANTY,BEST OIL/FILTER TO USE Napa Gold 1085 oil filter and Motul oils.This is what most Viper racing League race cars run with no prolems.
  3. T

    Loud clank from rear end

    check the bolts taht hold the rear diff to the frame.I have found several of thes on 01 cars.Almost sounds like someone hitting the frame with a sledge hammer.The bolts that are on the outsid of thr frame rails go to 100 lbs/ft the two that go up through the dog bone also go to 100 lbs/ft and...
  4. T

    Intake differences, some ‘94s are freaks…help!

    Sorry,I went back and looked at the pictures and it is a late build gen 1 intake.
  5. T

    Viper Text books

    I have some of the early training books and manuels from the Viper classes avaibleI should have a list soon of what is there.if anyone is interested let me know.Call me or send a PM.
  6. T

    Intake differences, some ‘94s are freaks…help!

    The 3 rib intake in your pics is a gen 2 intake.I don't think it will work on your gen 1.To many differences
  7. T

    Jumper to Open Trunk in SRT

    I have been out of town.I will try to get it posted soon.
  8. T

    Jumper to Open Trunk in SRT

    I will get with vipermad and have him post it in a members only section.The procedure is quite simple.I will do this later today
  9. T

    Empty car trailer heading south from Connecticut

    Why tow empty is you can haul two cars and help pay for the trip.
  10. T

    Empty car trailer heading south from Connecticut

    I am getting a new two car enclosed trailer this weekend(march 2,3,or 4).It is being picked up in east haven Connecticut.I am looking for something to haul.The trailer is headed to Wilmington NC but can go farther if needed.I hate the thought of pulling a empty trailer this far.Call me at...
  11. T

    BANG in the rear end

    Does it sound like someone hit the frame with a sledge hammer whe it makes the noise?If so you will need to check the diff mounting bolts.There are 4 that hold the rear diff in the car.They al torque to 100 ft/lbs.I has seen quite a few cars that do this sometime on a hard upshift or on a down...
  12. T

    viper won't start

    Re: viper won\'t start there is a 5amp fuse in the fuse block under the dash.There is also a 40 amp fuse in the power distribution center under the hood.With the key on and the relay out you should have 12 volts on pin 87 where the relay plugs in with the clutch pressed and the key in the start...
  13. T

    viper won't start

    Re: viper won\'t start If you jump the starter relay while the key is in the run position will the car start?How many miles are on the car?Does the key feel any different when turning it?I have seen the ignition key cylinder break inside if the switch.It will give no warning.It will allow the...
  14. T

    998 recall done incorrectly??

    Man Chuck your fast or I type really slow.
  15. T

    998 recall done incorrectly??

    Chad,The triangle shaped pieces that are riveted to the frame should be pointing towards the front of the car.If they are going towards the rear they will cover up the area that the oil filter would normally come thru.the oil filter shuld come off just like before the recall. Call me and I'll...
  16. T

    Invoice Priceing on 2005 SRT

    Frank,Do you want a 05?I have a yellow one in stock that really needs to go to a good home.Dealer is very motivated to move this car. Tom 910-228-8477
  17. T

    '05 Dreaded Shock Bolt Rattle...Might not be!!!!

    Re: \'05 Dreaded Shock Bolt Rattle...Might not be!!!! keep in mind when you torque these bolts the weight of the car needs to be on the suspension(loaded).It you torque them while in the air with the suspension hanging when you lower the car the bushing will all be loaded.This car cause the car...
  18. T

    Removal of rear taillight surround!?!? Its killing me!!!!!

    I see how you are Tony.I work on your car 1 time and you don't call anymore.Thats just fine I could have told you how to remove the rear panel also but now I'm not :D :D
  19. T

    A crazy thought. JoeB inspired.

    Come on chuck you can do it.It is only a short ride from Tampa.I think I heard the west coast guys say you don't have what it take to run with them anyway. East Coast ROCKS
  20. T

    Viper Days - Unlimited and "slicks"

    Re: Viper Days - Unlimited and I don't think he has the sports cups for the vipers anymore.It would be best to call him and see what the deal is.
  21. T

    Valve Stem Seal Question? HELP!

    This has been a issue for quite awhile.The stem seals can be installed without pulling the heads.It is a fairly easy job to do all you need is a air compressor a hose that screws into the spark plug hole and a hand valve spring compressor.It can be done in less than a half day.
  22. T

    Viper Days - Unlimited and "slicks"

    Re: Viper Days - Unlimited and Chuck go ahead and call Bobby to have you slicks ready for Sebring.If you have any other questions call me and I'll set you straight.You can run the slicks in Super Mod if that is where the car points out to.THe slicks are 5 points.
  23. T

    Taking my GTS to the tranny shop was like taking a toddler to the hospital

    You may want to get in touch with Eddie Martin at Bill Luke Dodge in Phoenix.Great guy and knows his vipers
  24. T

    HELP...need someone in Tampa, FL area to look a Viper over for me.

    Eric,You say you pick your friends wisely and then you hang out with those guys.Shows how much you know :D If you need anything they know where to find me.
  25. T

    Removing the harmonic balancer?????

    Hay Chuck you know Lucy to :p :p

Latest posts

Members online

No members online now.
Total: 994 (members: 0, guests: 994)

Forum statistics

Threads
153,839
Posts
1,686,670
Members
18,448
Latest member
JpKL

Share this page

Top