Search results

  1. N

    Clear Bra question

    A 5 year warranty is standard on most kits but some manufactures give more. Usually installation is not covered under the warranty, just the replacement of the material by the manufacture. Normal installation will take about 3 hours for the front bumper, hood, fenders and mirrors. Kits are...
  2. N

    Clear Bra question

    There is an installation video that can be seen at this link. http://www.clearmask.com/installation_videos.php When you buy a kit, they send you a complete and detailed installation video and application kit. As with everything, there is much more involved in the process than can be explained...
  3. N

    Clear Bra question

    Dave, I have installed both Aerogard and AR. on several different makes and models of cars, including 9 or so Vipers. I have Aerogard on my Viper and AR on my son's Viper and wife's T-Bird. Both probucts are very good and provide the same level of protection. The AR is much easier to install and...
  4. N

    Clear Bra question

    GT, Yes, they carry Viper kits for all three generations. I have two here in my shop now ready to be installed. On the website opening page, select STORE in the upper right hand side of the page. From there you can select, year, make and model. If you still have problems, call Toll Free...
  5. N

    Clear Bra question

    Newport Viper is absolutely correct. I have installed many ClearMask kits. The surface must be very clean and wax free. As far as waxing the material after installation, that’s up to the individual. I find that if you do, you will be able to see smudges from the wax in certain lighting...
  6. N

    1.7 Roller Rockers & Headers for sale

    jdoc, I think it would be fine to call him after 9:00 but before 10:00 PM. Bad Byte, that would be great if you could send some pictures or post them. I will pass the pictures and info about the rockers along to him. Hal
  7. N

    1.7 Roller Rockers & Headers for sale

    Those who sent a me PM concerning the headers, please let me know if you recieved my reply ok? Not sure my reply sent properly. Thanks, Hal
  8. N

    1.7 Roller Rockers & Headers for sale

    Thanks Grc, I will let him know what there were issues with the Crower rockers. Appreciate the information, Thanks again.
  9. N

    1.7 Roller Rockers & Headers for sale

    A friend, who sold his 97 Viper a few years ago, has a set of Crower 1.7 rocker ratio roller rockers, studs, etc. brand new in the box for sale. Kit number 73663K. Also, he has a new set of stainless steel Jet Hot coated headers for sale. Anyone interested, send me a PM and I will give you his...
  10. N

    MPH with 3.55 gears?

    Hi John, SnakeEye is on the money. This might help answer any other questions you and others might have about gearing effects as to MPH in each gear. I found it very helpful in making my decision to run 3.55s. http://www.turnzero.com/technical_resources.php?resource=gear_calculator Hal
  11. N

    Window Tint and Paint Protection

    Kevin, Take a look at this product. I have it installed on my 04 and have put ClearMask on several Vipers and other vehicles. Send me a PM if you need additional information, Hal :2tu: http://www.clearmask.com/
  12. N

    New Pirelli Tires Installed

    Located in Longview Harvey. Through your area often. Member of the Mid-South Viper Club. Link : http://midsouthvca.org/
  13. N

    New Pirelli Tires Installed

    Hiss, I have had 3.55s for two years now and I really like them. Great mod in my opinion. I have made two trips this year, one of 1,000 miles and another of 1,500 miles. My average miles per gallon on both trips was 18.5. Trips were in the northern Arkansas area, so not flat land area for sure...
  14. N

    Paint job- Viper vs Vette

    Check out ClearMask and that will end the rock chip problems. Had my 04 nearly 3 years now and no rock chips where the material is installed. Website http://www.clearmask.com/ The stuff is tough and you can't see it.
  15. N

    Z06 vs. 05 Viper (with 3 mods.)

    Well guys, I certainly am not as technically minded as most of you and as up to date on all the car magazines articles comparing the C6-Z06 to the Gen III Viper but let me share an experience with you. Last evening I was at a local car show along with several friends that are long time members...
  16. N

    Snake oyl billet gas cap cover.

    I have had mine installed for three months and there has been no problems. In fact, I find it works very well and looks really good on the car. You will probably need to experiment with the spacers to get a proper fit.
  17. N

    Road Tunes

    :cool: Ok folks, let me tell you'll bout some good cruising music, anything by Beausoleil! Now this be some good ole get down Cajun stuff! Let the good times roll :D :usa: :2tu:
  18. N

    My insanity continues

    I always wanted a Vette because I thought I could never afford a Viper. Things changed and when it came time to buy, I bought an SRT-10. The main reason, I wanted something different. There are only three Vipers in town including mine and the population here is 83,000. I see two are three...
  19. N

    Hoping the new coupe looks like the Comp Coupe? Fugedaboutit

    And a Viper is still a Dodge, big deal. Don't get pissy because GM finally grew a set, let's just hope DC reacts. As I said, nice set of wheels but one on every corner. No offense meant. :rolleyes:
  20. N

    Hoping the new coupe looks like the Comp Coupe? Fugedaboutit

    Lots of speculation about the new Vette, but no matter how you package it, its still a Vette. Nice wheels but one on every corner. When the going gets tough, the tough get going. Answer, Paxton! :2tu:
  21. N

    Well, after 8 years and 4 C5's.. I've moved to a Viper!.. First Post.

    Re: Well, after 8 years and 4 C5\'s.. I\'ve moved to a Viper!.. First Post. Congratulations! Welcome to the Viper World. :2tu:
  22. N

    Happy Holidays

    Merry Christmas and a Happy New Year to you too Alice! Yes, I am getting the bills for Christmas. Just what I have always wanted. :eek: Seriously, I have been blessed great health, a wonderful Wife, and a Son that I am very proud of in the Air Force. God Bless and take care of our troops...
  23. N

    Just picked up my Paxton Viper!!!

    :2tu: Thanks for the message Bryon! I sent you one in return. I will be calling your installer this week to see what we can work out. Power sounds awesome. Just what I need! :D If your going to crash and burn, might as well do it a 200 mph as 150. At least I will have a big smile on my...
  24. N

    Paxton goes on this weekend!

    Thank you Bryon! I would appreciate it. Hope you and yours have a great Christmas. Hal :2tu:
  25. N

    Paxton goes on this weekend!

    ARMORGOD, Are you having your Paxton intalled in Tulsa or nearby? I am planning on purchasing a unit in May or June of 05. One concern I have is finding a good installer. I live about 4.5 hours south of Tulsa and certainly wouldn't mind the drive to have the job done properly. Thanks, Hal

Latest posts

Members online

Total: 1,022 (members: 12, guests: 1,010)

Forum statistics

Threads
153,836
Posts
1,686,658
Members
18,447
Latest member
naimsito

Share this page

Top