Search results

  1. M

    Palmer Dodge in roswell GA

    Here is the story - I had my car in for service at Palmer Dodge. I had asked them to put on two new tires (which I supplied) They told me that their equipment could handle the job....Well, GUESS WHAT??? It could not. So in the middle of the day while I was at work, they called me and asked...
  2. M

    Palmer Dodge in roswell GA

    Unless it is warranty work, there is no need to go to them...Especially with McIntosh Performance just up the road. I can not forgive them letting someone steal my car and run it over a curb. Regards,
  3. M

    Direct port Nitrous

    Thanks Scott. I am calling him right now! Regards,
  4. M

    2 Nitrous Bottles in the Trunk

    Thanks for the link. That is exactly what I am looking for!!!! Regards,
  5. M

    Direct port Nitrous

    I am thinging of switching from the pre-TB setup to the direct port. Where did you guys send your intake??? How much did it cost to have done, and how long did it take??? Also, do any of you that have done this have regrets??? Thanks!
  6. M

    2 Nitrous Bottles in the Trunk

    For those of you that have the dual 10 lb. mounted bottles of NX in the trunk- Where did you get the bracket?? Did you have it fabricated, or is there someone on the forum making these??? Thanks! Regards,
  7. M

    Venom

    oh god...here we go again. Lublin reared his ugly head again! :) The best thing to do if you are interested in that car is to take it to a Dyno. A 550 should not make 550 at the wheels. But a 650R should. There is nothing wrong at all with my Hennessssseey car. It is GREAT! Regards,
  8. M

    LPE WORLDS FASTEST MOTOR ONLY VIPER BRINGS ON DA PAIN AT BG

    Way to go Norm!
  9. M

    Performance Viper Cam Shaft Hydrolic Lifters HELP !

    True. I do have a solid. But David also did my 650R heads back when I was still running a hyd.... He is a pretty smart guy!
  10. M

    My harmonic balancer just came off!?!!

    Mine has come off before......no damage. Hopefully you will have the same results. Regards,
  11. M

    Performance Viper Cam Shaft Hydrolic Lifters HELP !

    Try giving David McIntosh a call over at McIntosh performance. He did my headwork...and My springs have 195 on the seat and 520 open. He should be able to tell you what to get. 678-513-4500. Regards,
  12. M

    ATLANTA MUFFLER SHOP?

    Re: ATLANTA MUFFLER SHOP? They did my whole car. Gears 70's TB's Borla's Headers Shifter Radiator oil pan, and fan upgrades 650R install(heads,cam, intake, flywheel, computer, pulleys) Wilwood Big brake kit NX Wet kit (hidden installation) 750R install - complete assembly and...
  13. M

    ATLANTA MUFFLER SHOP?

    Re: ATLANTA MUFFLER SHOP? McIntosh Performance 678-513-4500 Great service and Viper knowledge. Regards,
  14. M

    exactly how much top end does 3:55's kill?

    Re: exactly how much top end does 3:55\'s kill? I have the same program and it shows that the 3.55 is the gear to have for a roll on race that does not exceed 135 - assuming you are in the right gear. And that is NOT horsepower dependant. After 135 the edge goes to the 3.07. Unless you...
  15. M

    Intake Manifold

    The options are very limited. I think Wast Coast has another style avalable other than the GTS-R. I would check with them. TNT was making custom intakes at one time too. As for Elite's product, that looks interesting, but I HATE to go to the Single TB design. I would be interested in seeing...
  16. M

    SC in the 9s???

    1Tony1 has put his Roe car in the 9's. He did use a small shot of nitrous. I am sure he can chime in..I think it was a 40 shot. But, I think sooner or later a Roe car will run the number with just the blower. UtahViper is close..... Regards,
  17. M

    exactly how much top end does 3:55's kill?

    Re: exactly how much top end does 3:55\'s kill? JD - the 3.55's hit redline at 135 MPH in 4th gear. (not 118) 3.07's are good to 148. Regards,
  18. M

    3.55 rear end with Nitrous?? Overkill?

    I have 3.45's and use the 200 shot. I do have traction issues in 3rd - but the car is accelerating. I only use the Nitrous in roll on situations, so I can not speak of what would happen from a dig or in 2nd gear. I gave serious consideration to going back to the 3.07. But for me, the better...
  19. M

    TT and then some

    I think the problem is that to get a N/A car to make 750 HP, you have to have higher compression pistons, milled heads, crazy cam, more cubic inches, and some other things, that don't actually work well at all with a Turbo. I came to that cross road a while back.....It's all about personal...
  20. M

    DLM Viper vs stock Busa!

    ElDiablo - I felt the same way when I lost to the busa and the gixxer. I still scratch my head wondering how it happened. I was at least 25-0 against bikes until that race. And wouldn't you know it - that race is the one that ends up all over the internet on video. Manny, there is no shame...
  21. M

    Where are the famous all Motor guys Norm and SW?

    Yes, they are the best Unitrax. The light weight ones. I don't think I will be going to Bowling green. But maybe we could hook up at t&t one friday at commerce. Regards,
  22. M

    Where are the famous all Motor guys Norm and SW?

    got em...... Titanium.
  23. M

    Where are the famous all Motor guys Norm and SW?

    They are both afraid of my car now.... Not that it will ever be on the strip....but so what, they are still skeered!
  24. M

    Valve Lift- Cam Lobe vs. Rocker arm

    Here is the deal - dependant on the amount if lift you desire, you may have trouble with the stock rocker ratio. You can only have so much lift until the base circle on the cam becomes too small and requires a custom lifter OR grinding modifications to the block. How much lift do you want...
  25. M

    Carbon Fiber Air Boxes FOR SALE

    Looks very nice! Too bad I already have one...... Thanks for making these available. Regards,

Latest posts

Members online

Total: 887 (members: 2, guests: 885)

Forum statistics

Threads
153,843
Posts
1,686,697
Members
18,455
Latest member
Mando9595

Share this page

Top