Search results

  1. C

    Just got my snake’s tires performance match balanced

    Please let us know what you are taling about. I am just curious
  2. C

    Problem re-installing rear shocks. Too long!

    Re: Good news and bad news. I would definately recomend you get the car properly aligned. When they do it properly they will check all ride hights before doing the alignment. Also the suspension bolts need to be tightened properly or you will have serious problems with the factory rubber...
  3. C

    Problem re-installing rear shocks. Too long!

    I am not looking at my suspension at the moment but check to see if there is a stop that the suspension is hitting. If there is not then your suspension bushings could be binding. Both of your shocks should be the same exact size so they should go from side to side with no differences.
  4. C

    Floor jack

    I have been looking for one also. I know Harbor Freight sells some low profile ones that look like they would work.
  5. C

    Does anyone have a Mopar ECU or PCM

    I am looking to buy a Mopar PCM. It is part number p5007313. I think it has 313 in big letters on the label. Please email me [email protected]. Thanks John
  6. C

    What to do with headlight film coming off?

    You can try buffing them with a high speed buffer. It is only a temp fix.
  7. C

    SRT Race engine controllers now in stock!

    none for the gen 2 cars?
  8. C

    Back of car want to turns right???Any helpful ideas

    Chuck is that a temporary fix until he can get an alignment? I was just thinking if the tie rod was loose it may have gotten out of alignment.
  9. C

    IDIOTS DONT KNOW WHAT STOCK IS....

    Mine was ordered with catback, and roller rockers plus it is ACR; smooth tubes and K&N's. It is not stock because Catback and Roller Rockers are accesories same as gears. As long as the tires are DOT they are fine with me because the are normal wear items. Same as brake pads. Everyone needs...
  10. C

    What to do with old foggy headlights?

    High speed buffer and polishing compound
  11. C

    Problems with paint on hood ?

    Has anyone had trouble with the paint blistering on the hood of their car? Mine has started blistering around the NACA duct. When I spoke to the dealer today I was told they would strip and repaint it for free. I was told they did the same thing a few days ago for a 96 with the same problem. I...
  12. C

    question regarding headers!

    I also have the old Mopar borla setup. I cut the reducers off and welded a 3" section to the inlets on the mufflers. Hope this helps
  13. C

    Cruisin the Coast: Mississippi Gulf Coast Huge cruise and show Oct 4-Oct12

    Cruisin the Coast is going on on from 4 Oct - 12 Oct on the MS gulf coast. It is huge. Last year they had about 5000 registered cars and about 3 times that many that were not registered. They have a site on the internet. :headbang:
  14. C

    Cruisin the Coast

    :headbang: :2tu: Is anyone going to Cruisin the Coast this year? Oct4- Oct12. It's not on the events calendar but it is huge. Last year they had about 5000 registered cars.
  15. C

    Where to get old Borla system

    I finaly decided to get an exhaust sytem for my car. Now Borla quit making the original system. Just wondering if ayone had an old Borla exhaust sstem for sale new or used in great shape. Please email me.
  16. C

    Clutch kits?

    does anyone know the size of the inpt shaft on the transmission and the spline count. I found a really good deal on a clutch and wonder if it will fit.
  17. C

    Who makes these valve covers?

    I am not sure if Jessie James made the valve covers but the bullet casings on the oil fill are one of his trademarks.
  18. C

    Exhaust sacrilege

    keep the rear exhaust and get the covers for the side exhaust. Get a chrome exhaust tip and weld it on to the stock exhaust without cutting the stock exhaust. This will make it look like it has side exhaust without the noise of the side exhaust. Disclaimer This is just one way I thought of to...
  19. C

    cruisin the coast MS gulf coast Oct 10-12

    There are alot of nice cars in this about 5000 registered. To register they have to be very cusomized, exotic or 25yr old. Vipers are classed as exotic. I
  20. C

    Ram-X Foam Filters

    Are these the same as Ram Air? If they are that is what I use on my car. They have a multi layer foam. Make sure to use a good sticky oil with them. The oil is what catches the dust and dirt. I like them and will continue to use them instead of K&N. They have alot more surface area to catch...
  21. C

    BSR (?) Airbox Mod, need help

    Try using thin wall stainless for the joints. You could go with a short lenght of hose, say 2" for the airbox and the reducer on the throttle body with polished or chrome tubing in the center. They do make kits like this and they look good.
  22. C

    Pad prep for 14" slotted rotors?

    Re: Pad prep for 14 The slots should be beveled. Not the pads. There should not be any kickback.
  23. C

    T&D Rockers

    I got mine from a dealer on eby for $600. I will see who it was this weekend.
  24. C

    VIPAIR™ Dyno Results on 99 RT 16 RWHP!!

    Re: VIPAIR™ Dyno Results on 99 RT 16 RWHP!! I would also like to know what testing was done not just general data. I like to know where the numbers came from.
  25. C

    Hooker Headers vs '98 Manifolds...Dyno Results Within...

    Re: Hooker Headers vs \'98 Manifolds...Dyno Results Within... Thanks for the info. The man who designs all of my engines said the stock headers look good on my 2000. He did tell me he would change the collector to a 3" if I went with a 3" exhaust. Also I was told that going to haeders on a near...

Latest posts

Members online

Total: 718 (members: 10, guests: 708)

Forum statistics

Threads
153,844
Posts
1,686,710
Members
18,456
Latest member
viper2002

Share this page

Top