Search results

  1. B

    Just got into it with an R1

    When do we get to see the video?
  2. B

    Where to Get Smooth Tubes???

    I don't know if matters to you or not, but I ended picking up the SnakeOyl tubes because they are 5-ply like the ACR style Mopar smooth tubes, just much less expensive. I have noticed a lot of silicon tubes are 2 or maybe 3-ply at the most, and I have actually seen these undulate under hard...
  3. B

    ..and you guys thought my wing was big...

    And dual tachs, make that 750hp.
  4. B

    ..and you guys thought my wing was big...

    Look at the engine pic, it has what appears to be little LED lights in the wipers, you can see the wires leading to it, nice install I might add. And the paint on the intake manifold looks like it was rattled canned, you can actually see it thinner in spots, either from a poor paint job, or...
  5. B

    Anyone try the short shift drop kits?

    Good point, exactly the reason why I want to go with too heavy of a drop, that way I am insured I still get to see some of that nicer polished shaft on the '99 and newer vehicles...
  6. B

    Anyone try the short shift drop kits?

    What I choose to put on my car has nothing to do with my aptitude as a modifier, nor with my budget. I am just trying to be as efficient as possible with the decisions I make toward modding my car. So I want to shorten the throw of my shifter, I have one of two ways of doing that: I spend...
  7. B

    Adjusted hood a little today, now alignment is perfect and no noise!

    When I purchased my Viper three weeks ago, I noticed that the hood rattled slightly on the passengers side at slow speeds and a little at idle. If you picked up on that corner closest to the door, you could actually wiggle it slightly and it would make the same noise. The hood always fit...
  8. B

    Anyone try the short shift drop kits?

    3" is a little much for me, I was just thinking about 1" shorter than stock. Or the 4".
  9. B

    Viper Engine Code?

    You always here the GM guys talk about the L98, LTI, LS1, or LS6. (All of which I have owned by the way.) Does the Viper also have an engine code number?
  10. B

    HERE ARE A FEW PICS I TOOK THIS MORNING.

    Yes, but the 5 series R's do not reverse the hardware like the 8 series do... and that is what makes the most visual impact.
  11. B

    Anyone try the short shift drop kits?

    I will have to check out that MGW unit. Thanks!
  12. B

    (Pics) My new '99 RT/10 Silver/ Black!

    Re: (Pics) My new \'99 RT/10 Silver/ Black! Not long Perry, I already ordered the exhaust...
  13. B

    HERE ARE A FEW PICS I TOOK THIS MORNING.

    I love those HRE's. I had a set of 18" and 19" HRE 545's on my Z06. Those new 8 series wheels are gorgeous. In my opinion HRE did exactly what they should have years ago, that is, reverse the bolts and make the inner rim as big as possible. It really makes a difference over the 5 series.
  14. B

    Anyone try the short shift drop kits?

    Like the kind West Coast Vipers sells? The ones that drop either 1" or 2". I assume the B&M assembly probably feels better. But for a low budget drop without having to completely disassemble and remove the shifter assembly, I thought this may not be a bad way to drop some of that length out...
  15. B

    (Pics) My new '99 RT/10 Silver/ Black!

    Re: (Pics) My new \'99 RT/10 Silver/ Black! It came from California, 13,500 miles. Rocklin is in Norcal, 15 miles east of Sacramento.
  16. B

    (Pics) My new '99 RT/10 Silver/ Black!

    Re: (Pics) My new \'99 RT/10 Silver/ Black! I am going to do the smooth tubes, k&n's, and the snake oyl rear sub. I want stuff that is strictly bolt on, so that I can have a truly original car too if I want. This was my previous ride: It was pretty heavily modified with...
  17. B

    Look at this poor poor Viper!!!!! STUPID RICERS!!!!!!!!!!!!!!!!!!!

    Deep thoughts of a demented ricer: "Humm, if I just cut the wing and body kit off of my Prelude I bet I could make a Viper look sick..." Do I see a feature car possibility for the Fast and The Furious Episode 3?
  18. B

    Who's the most friendly Viper dealer in Central CA?

    Re: Who\'s the most friendly Viper dealer in Central CA? Conatct Marv Rose at www.dodgevipersforsale.com, He is in Fresno, and has a lot of contacts there.
  19. B

    (Pics) My new '99 RT/10 Silver/ Black!

    (Pics) My new \'99 RT/10 Silver/ Black! I finally got the opportunity to take some pics of my new ride. It is a '99 RT/10, silver w/ black leather, 13K miles, has the factory hardtop and it's bone stock. Probably one of the most perfect condition Vipers I have the opportunity of seeing in...
  20. B

    Pictures of Women with Vipers

    I would like everyone to know that if my Viper is needed for further photo shoots with any of the above ladies, it is available. ;)
  21. B

    Anyone got a set of 99-02 OEM rear rims?

    I have seen some on www.car-part.com, they give locations for parts nationwide off of wrecked vehicles. Sometimes they want a ton for the wheels if they are in good shape, but it is all based on who is selling them.
  22. B

    Which spark plugs do you guys recommend for a NX wet system and the gap for

    NGK TR6. It is a non platinum plug. Nitrous has been known to melt platinum plugs, I don't how true that is, but I have always used the TR6 in my last two nitrous driven cars, with awesome results. My Z06 had a 150hp wet shot TNT kit. I used the TR6's gapped to .35. Usually gapping them to just...
  23. B

    Best Price/ Vendor for Mopar/ Borla Exhaust?

    Doesn't have to be Mopar, I just like the tips. And loud doesn't bother me. Actually after further investigation, and talking with Collector's Choice, I may consider going with the Snake Oyl rear sub assembly. I like their product because it does exactly what I want. It gets rid of the rear...
  24. B

    Best Price/ Vendor for Mopar/ Borla Exhaust?

    Mike is no longer selling them, for whatever reason. And I think that other guy has the standard Borla (but I will check) without the etched tips.
  25. B

    Best Price/ Vendor for Mopar/ Borla Exhaust?

    Looking to get one...

Latest posts

Members online

Total: 707 (members: 16, guests: 691)

Forum statistics

Threads
153,844
Posts
1,686,709
Members
18,456
Latest member
viper2002

Share this page

Top