Search results

  1. P

    08 GEN 4 No spark

    I'm not sure what those relays are on the Gen 4, they aren't there on a Gen 3. The only relay that could cause a no-spark issue is the ASD relay. Find it, it might be in the main fuse box. Try swapping it with another relay and see if that works.
  2. P

    08 GEN 4 No spark

    That PCM looks like a used unit that came out of a junk yard or eBay. the "08 Viper" writing on it gives it away. Your issue might be that the VIN number on the PCM doesn't match the car. Like you said, you need a good scan tool
  3. P

    08 GEN 4 No spark

    Not sure if the security system is your issue. My friend had a similar thing happen on his Gen 4. He thought he unlocked it, went to start it and the car fired up and then immediately died. On the next key cycles, it would not even crank. I told him to close all the doors/trunk/hood, lock the...
  4. P

    Does anyone have a tune file for an AEM Series 2 for a Gen 3?

    I put mine under the steering wheel. Some people put them in the engine bay. It looks like this
  5. P

    Does anyone have a tune file for an AEM Series 2 for a Gen 3?

    You just need a regular USB cord, the type typically used for printers. If you don't have one, I would buy one for you off Amazon haha. Picture of USB cord attached Do you know where your AEM box is? One end of the box will have your wiring harness plugged in. The other end has the USB port...
  6. P

    DIY Catch Can Install

    Nice job, looks good. Where in Canada are you? Is that can vented to atmosphere or you're recirculating the gasses back into the intake?
  7. P

    Does anyone have a tune file for an AEM Series 2 for a Gen 3?

    anyone? I think I just need to have the correct ignition settings. Can't find them online anywhere. Crank/cam rising or falling edge? How many teeth? Ignition sync? I've been working on this for days now, still can't find the correct settings
  8. P

    Gen 3 upper door panel trim

    There's a thread on *** in the classifieds: "New Reproduction Gen 3 , Gen 4 inner Door Trim ,Improved and More Robust then Factory. Factory Trim has been Discontinued 10 YEARS Ago and Notorious for cracking . This Trim has Factory Fit and appearance to prevent rattles and squeaks ...
  9. P

    Does anyone have a tune file for an AEM Series 2 for a Gen 3?

    I'm trying to get my car started after installing the AEM standalone and am not having much luck. The box has a file on it from RSI, but something is off with it. The car just backfires, won't start or idle. I'm hoping someone has a file they can share with me, so I can give it a try. If that...
  10. P

    Updating my twin turbo Gen 3, have some questions

    So I got tired of waiting for the new bracket from RSI and decided to cut up the one they sent me. I made it about 1.5" shorter and notched the base for the return fuel line to fit. Was finally able to hook everything up and put the intake back on. Tested the fuel system, pumps prime like they...
  11. P

    Paxton Supercharged 2006 Coupe Build Thread

    He said he did Exotic Engine breather system with oil catch can. On my car, I just got a catch can system from RSI. I removed the two front fittings off the valve covers and had the holes drilled/tapped at a machine shop and installed the AN fittings.
  12. P

    Updating my twin turbo Gen 3, have some questions

    Turbos back in Working on intake and fuel rails. Excuse the messy bench
  13. P

    Updating my twin turbo Gen 3, have some questions

    New injector pigtails installed. Tried to make them look as factory as possible. RSI power steering pressure lines installed working on installing the RSI oil cooler lines Wiring harness installed
  14. P

    Updating my twin turbo Gen 3, have some questions

    Some updates... getting there slowly but surely. Still have some confusion about the knock sensors. The wiring harness I got has a knock sensor wired directly into it. I'm assuming it was originally made for a 2003/2004 car, which didn't have factory knock sensors. I reached out to RSI, they...
  15. P

    Updating my twin turbo Gen 3, have some questions

    I'd like to see your catch can placement, how they ran the harness and where they put the ignition coils. Is your car tuned with AEM?
  16. P

    Updating my twin turbo Gen 3, have some questions

    Can you please do me a favor and take some photos of the engine bay? I want to see how they laid everything out and where they put the various sensors.
  17. P

    The Quest for 275 MPH

    now that's a full blown race car. Where were the turbos mounted before?
  18. P

    Updating my twin turbo Gen 3, have some questions

    Hey guys, I have a 2005 twin turbo Viper which was built by Racing Solutions, looks like maybe back in around 2008-2010. I've reached out to RSI to try get some information about the car, but they don't seem to know much about it. I had some issues with the car not wanting to build more than 5...
  19. P

    stand alone wiring system

    Pm sent. If it’s an infinity system I will take it
  20. P

    Buying a Gen 3 that needs these things - Advice

    If you’re gonna change out your shocks, go with a new set of coil overs. My car had the same issues, the front shocks were leaking. I ordered a set of BC racing coil overs and the car rides 10x better and I can set the ride height
  21. P

    The Quest for 275 MPH

    thanks for posting all these updates, hopefully you see the 275 you're hoping for!
  22. P

    Paint Repair to Flat Black Exhaust Exit

    I think regular high temp rattle can flat black should work. I highly doubt you'd be able to see a difference in color, even if there is one. I would sand the whole black area, mask off the red and spray
  23. P

    AEM vs VEC vs Split Second

    Sorry to resurrect an old thread. I recently bought a 2005 TT car which was built by RSI. Don’t really have any other info on it. No one really knows if the engine is “built”. I reached out to RSI, and they think it is, but no way to know for sure without dropping the oil pan. anyway reason why...
  24. P

    Anyone know this car? 2005 Silver twin turbo... built by racing solutions?

    On another note, a google search of the VIN turned up the following: Joseph Pence is listed as owning a 2005 DODGE VIPER in IN in 2005 Address: 10955 ANDREWS PL, FISHERS, IN 46037 Maybe I can reach out to RSI and see if they have a record of that name. Maybe he's related to Mike Pence? Who...
  25. P

    Anyone know this car? 2005 Silver twin turbo... built by racing solutions?

    looking at buying this car, apparently it was built back in 2005/2006. Current owner doesn't know much about it. He says the twin turbo kit was done by Racing Solutions. Apparently they can't give him any info on it as their builds are recorded by customer name, not VIN number. And he does not...

Latest posts

Members online

Total: 2,129 (members: 4, guests: 2,125)

Forum statistics

Threads
154,491
Posts
1,691,390
Members
19,245
Latest member
toizrit

Share this page

Top