Search results

  1. H

    wide tires for the street

    what brand are these tires? thanks, al
  2. H

    wide tires for the street

    hi. i did a great deal of motor work. saw the best results from porting the intake manifold. went up two sizes in injectors. also saw some gains by replacing the exhaust system with stainless headers and all stainless components including the 3.5 diameter tubing. have not used the nitrous...
  3. H

    wide tires for the street

    my goal is to use the stock 17 inch rims.
  4. H

    wide tires for the street

    hi. primarily drag racing. rather high hp. with nitrous. thanks, al
  5. H

    wide tires for the street

    please recommend the widest rear tire that will fit in the stock wheel well. also recommend the best choice for high performance rear tire. thanks, al
  6. H

    coil paks

    hi. i built my own stainless headers and used roe cats and stainless mufflers. the exhaust did some improvement. i must say the greatest improvement was porting the intake manifold. the inside looked like a gross mismatch of the port seams. i then port matched to the heads. probably...
  7. H

    coil paks

    hi. a bigger bomb? possibly. i worked directly with nitrous express on the selection of components. i have previous experence in cc/altered as a licensed driver and owner. that machine was a bit over 2000 pounds and had twin turbos on 500 cu.in. producing in excess of 2000 dyno hp. i...
  8. H

    coil paks

    hi. the plan is to begin with a small shot...50 hp total. once above 200 hp, evaluation of weak links will begin. i fear the dyno testing will show weak bottom end, caps and bolts. drag racing will probably include the rear. why four systems? it allows better control of volumn and...
  9. H

    coil paks

    thanks, al
  10. H

    coil paks

    yes. i am interested. please email me with the amount due. 08807 new jersey. thanks, al
  11. H

    coil paks

    hi. what i have are four nitrous express viper kits. each kit is rated for up to 500 hp shot. i do fear both head bolts and main bolts and caps. as i reach completion of all the upgrades, i intend to do much dyno testing. part of the testing will include checking bolts for stretch. thanks, al
  12. H

    coil paks

    hi. i installed four 500hp units. plus, enormous amount of parts and work. spent 40+ hours porting intake manifold alone. thanks, al
  13. H

    coil paks

    hi. no problems, just thought if an upgrade was available, i would do it. i have added a very large nitrous system, and am upgrading to suit. thanks, al
  14. H

    coil paks

    hi. is there a better coil pak available for gen 1? thanks, al
  15. H

    fuel pump gen 1

    thanks for your reply. using a second pump would probably imply a larger diameter fuel line as well. the two pumps would be run into a common feed fuel line. is this correct? thanks, al
  16. H

    fuel pump gen 1

    hello. what hp. will the stock gen 1 fuel pump support? is there a better pump for high hp? what hp. will the stock fuel line support? thanks, al
  17. H

    cold plugs

    please suggest a spark plug for a gen 1 that is two steps colder then stock. thanks, al
  18. H

    injector flow rate

    is there a 35#/hr injector for a gen 1 viper? thanks, al
  19. H

    injector flow rate

    hello. please advise the best source to increase gen 1 flow rate approx. 50%. thanks, al

Latest posts

Staff online

Members online

Total: 709 (members: 9, guests: 700)

Forum statistics

Threads
153,843
Posts
1,686,699
Members
18,455
Latest member
Mando9595

Share this page

Top