05 copperhead (sidewinder) center caps

[dipapa]

Last year I had my 05 copperhead sidewinder wheels powder coated semi gloss black. They look great and a pic is attached

Anyone know where to find a complete se of polished sidewinder wheel center caps (qty 4) and lug nuts (qty 24)?

 

[bluesrt]

are they differant from others

 

[dipapa]

are they differant from others

Im not sure. Just trying to determine if the sidewinder center caps are the same as the general SRT10 in look and fit.

 

[CPPRHD265]

OD of the cap is 2.128 in.
The center hole in the rim is 1.90 in. where the tabs make contact.
There is a slight recess in the face of the rim for the cap OD to fit in.

Hope that helps.

 

[dipapa]

OD of the cap is 2.128 in.
The center hole in the rim is 1.90 in. where the tabs make contact.
There is a slight recess in the face of the rim for the cap OD to fit in.

Hope that helps.

Is that size same for all Gen 3 SRT10 factory wheels?

 

[CPPRHD265]

That is the sidewinder rim & cap from my 2005 copperhead. I just happen to have one sitting in my living room to correct a small blemish I found...

You can probably guess I'm unmarried

 

[dipapa]

Does anyone have a source for gen3 wheel center caps at a good price

 

[Shandon]

Does anyone have a source for gen3 wheel center caps at a good price

Good price will be the hard part. They are expensive for center caps but thats "viper". Check on ebay or call Jon B. see what you can find. Good luck. I think new a set goes for close to 150-200.

 

[Flexx91]

Good price will be the hard part. They are expensive for center caps but thats "viper". Check on ebay or call Jon B. see what you can find. Good luck. I think new a set goes for close to 150-200.

Not sure if the Sidewinder caps are the same as the as the 10 spoke caps but they retail for about $60 each. The part number is 0TW94XZAAA. It is the only center cap listed for all wheel options for the '08.