/ Register

  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Gen 3 twin screw supercharger setup

Discussion in 'SRT10 and SRT10 Coupe Discussions' started by Sammy0009, Jul 20, 2015.

  1. Jul 20, 2015 #1
    Sammy0009

    Sammy0009 Viper Owner

    Posts:
    5
    Joined:
    Jul 6, 2015
    Is anyone aware of anybody doing this to date? I realize cutting the hood, modifying the cross beam for belt/pulley clearance, new intake, air box etc., may turn people off when there are Paxton kits readily available....
     
  2. Jul 20, 2015 #2
    Nsane1

    Nsane1 Enthusiast

    Posts:
    1,153
    Joined:
    Nov 8, 2000
    Location:
    Dallas, TX US
    Wow that would be a beast. I don't know anyone that does this. you're right, many options available, but this would be quite the wild, but cool as heck, setup
     
  3. Jul 20, 2015 #3
    Sammy0009

    Sammy0009 Viper Owner

    Posts:
    5
    Joined:
    Jul 6, 2015
    The good news is that Mr. Roe has already made a kit for the SRT Ram...
     
  4. Jul 20, 2015 #4
    Sammy0009

    Sammy0009 Viper Owner

    Posts:
    5
    Joined:
    Jul 6, 2015
    This is the setup

    image.jpg
     
  5. Jul 21, 2015 #5
    MoparMap

    MoparMap VCA National President Venom Member

    Posts:
    1,766
    Joined:
    Jan 7, 2013
    Location:
    Kansas
    If you relocated the coils (or have a gen 4), I'd wonder if you couldn't sink the supercharger in the valley like several modern cars are doing to help the hood clearance issue. Might only need a slight bulge that way instead of a full cut, but would have to measure to know if that's even feasible.
     

Share This Page