Gen III AC/Heater question

[fastandloud]

Don't know why but for whatever reason the heater or ac won't blow unless the fan is on high. Not on high...nothing. When you turn the knob all the way to high both the heater or ac will work...but of course it's blowing on the highest setting.... Ideas??
I didn't even know how to search for something like this so forgive me if I missed it....
BTW that raffle car is incredible!

 

[Dan Cragin]

Your fan blower resistor is bad. I have these in stock.

Dan

 

[fastandloud]

Your fan blower resistor is bad. I have these in stock.

Dan

Thanks Dan!

Scott

 

[fastandloud]

Your fan blower resistor is bad. I have these in stock.

Dan

Well, the resistor is fine..I picked one up locally today after it got up into the upper 80's and I just couldn't stand it anymore. Replaced and nothing. Compressor kicks on but nothing more. Is there a fuse I should look into next???

 

[fastandloud]

Just for future reading...in this case the blower motor itself was seized up. Easy to pull out and install...just 3 screws an electrical plug and hose.

 

[NYC SNAKE]

Just for future reading...in this case the blower motor itself was seized up. Easy to pull out and install...just 3 screws an electrical plug and hose.

Hey there, How much was the blower motor ?

 

[PacificSEASnake]

Hey there, How much was the blower motor ?

I recall the resistor costing north of $120, so the motor has to be a bit more.

 

[fastandloud]

I recall the resistor costing north of $120, so the motor has to be a bit more.

Acutlly less than the resistor...hard to believe right? $116 bucks...

 

[1fastviper]

maybe the switch

 

[fastandloud]

maybe the switch

No, all is good. It was the blower motor after all. Man that thing was locked up solid!