How fast is a Z06 a Vortech S/C

[vegasviper]

RWHP, ET ?

 

[Snake Bitten]

The LPE Z06's I have seen are only pushing around 450 rwhp and 430 rwtq...Just smoke him and get it over with...

 

[Cobra4B]

Well it depends on what kind of blower you go with. If you go w/ the Magnuson (roots) it'll have a flatter curve and make between 450-500 rwhp w/ intake and headers and tuning. If you go w/ a centrifugal like a Vortech or a Paxton Nove or an ATI Procharger you'll me makeing a lot more horsepower. The problem is the high compression of the stock engine. You can only run 5-7 lbs of bost safely. These cars will make around 550 rwhp. Now if you forge the bottom end and lower the compression w/ a set of 6.0 liter truck heads you can run crazy boost safely and make 650-700 rwhp. It all depends on what the owner has done. The cars can run anywhere from only low 12's to mid 10's depending on driver skill etc.

 

[SNKEBIT]

who cares???????

 

[Cobra4B]

BTW Lingenfelter doesn't use any centrifugal blowers... they only use the mag.

 

[2MANYTOYS]

BTW Lingenfelter doesn't use any centrifugal blowers... they only use the mag.

BTW, My brothers LPE S/C car with other mods. Only made 451rwhp. Most of the time the ATI's and Vortech's have heat issues on those cars. A friend of mine here has a 2000 c5 coupe with a 100 shot of NOS and raced a Z06 with Vortech SC and smoke him not once but three times.
Cobra do us King of the Hill Viper owners a favor and go back to your your chevy. forums.

 

[2MANYTOYS]

RWHP, ET ?

probably 450-500, 125 if they are lucky

 

[ViperJoe]

How 'bout posing the question on the Z06vette.com or Corvetteforum.come sites

 

[ChoiceViper]

He's still here?