anyone have a used one preferrably ? this is the part that's next to the base kit paxton s/c head in the engine compartment ?
pm or email me [email protected]
pm or email me [email protected]
need an air/water cooler - Gen2
- Thread starter plumcrazy
- Start date
v10kingsnake
Viper Owner
Careful Phil, don't want you buying something you may not be able to use. As I mentioned to you earlier, UGR told me that you need to have a custom one made since you do not have a paxton made kit but rather a DLM kit. He said they were not the same and the paxton kits air/water chiller would not work on your setup. Maybe he was wrong
but better safe than sorry man. Kevin told me to have you order the coil from precision turbo and have dlm fab you the chiller to fit HIS kit.v10kingsnake
Viper Owner
v10kingsnake
Viper Owner
Phil, just a thought but you may wish to try Jason Heffner as he used to build lots of these Paxtons but I believe he mostly did the front mounted air to air chillers with his. Maybe he has a few of the stock a/w chillers that came with his kits he bought from Paxton before he modified the kits for the air to air version. Worth a try...
Jim Wilson
Enthusiast
Hey Phil, since we have the same setups, I'm curious what you are up to. The air flow restriction from the air-to-air intercooler is killing me in warm weather driving. If a air/water kit (modified by Doug) provides similiar results (heck even if it means a loss of 50HP or so) that would be great since we're in the 800+ HP range anyway, just to keep things cooler.
Hi Phil,
If you are looking for something custom made, let me know- I can produce one for you pretty quickly in just about any configuration.
If you are looking for something custom made, let me know- I can produce one for you pretty quickly in just about any configuration.
Similar threads
