Need Help Replacing Stock Alpine Radio in my 2002

[aloushi]

I did a lot of searches and have come up empty, my 02 RT/10 has stock alpine radio with stock amp in rear left of trunck. I would like to install a kenwood 7" flip out but don't wanna have to alter the factory harness coming from dash. I found the round 8-pin on ebay but no luck finding the 16-pin to connect to factory harness coming from car. What did you guys/gals do to install your various radios?? Thanks!!!
here's a couple pics of rear of radio...

http://i800.photobucket.com/albums/yy290/feb2274/photo1.jpg
http://i800.photobucket.com/albums/yy290/feb2274/photo2.jpg

 

[AJ02]

I may get flamed for this, but I didn't want to cut my harness either. I just "tinned" the wires for my new head unit and inserted them in the proper connection point in the stock plug, secured them and taped it all up. Works just fine.

 

[InjectTheVenom]

One of the better sorted ma-and-pa auto parts stores should be able to help you out, I was lucky to find one close to me when I needed to do a custom install for the Greddy turbotimer in my Calibra.

 

[01rt10outlaw]

took mine to car toys, they did and amazing job, sat there the whole afternoon though while they updated stereo, amp and speakers...door , tweeter and 6inch whoofer.

 

[moparracing]

what i did, post #20:

http://forums.viperclub.org/threads/651261-2001-Stereo-upgrade

 

[dave6666]

It's just a wire. Cut it.

 

[aloushi]

Your absolutely right, that's exactly what I will do this weekend!!