Needing A New Cultch

[FSTENUF]

I need a new clutch for my 02 rt 10 and was hoping for some help on what to put back. If i am going to take it apart i mite as well put the best i can get back in. i mostly street drive very little track time. want something that will hook up my 345's p2's to the ground. but don't want to use 2 feet to hold it in at red lites.

 

[carguy07]

Honestly the stock clutch does everything pretty well. Track time = auto-cross or 1/4 mile?

 

[99 R/T 10]

Agreed. On a relatively stock car or with minor bolt-ons, the standard LUK replacement is the best.

 

[dave6666]

ebay - $165

Have had no problems.

You'll need the OEM roller pilot bearing and the correct pilot tool however.

 

[Dave's Big Brakes]

Just got one off ebay also this is my second one only because I have 58,867 granny miles NOT
Like Dave said replace with oem pilot brg, I'm also doing a new slave cyl this time.

All this testing

Big Brake Dave

 

[Dave149]

Where do you get the pilot bearing tool from?

 

[dave6666]

Where do you get the pilot bearing tool from?

All metal. Fits any car about. Worked VERY well.

Clutch Aligning Tool Set

 

[FSTENUF]

thanks for the help. I gave Jon B at parts rac a call he told me that he has sent out 4 sets of fly wheel/clutch/bearing and slave set ups this week. 900 ft lbs clutch and a new fly wheel that is 20.5 lbs less then stock. hope this all works. he said that with 36000 miles it is due for a new set up. thanks again