PIC.....CHROME INTAKE & other parts..........NICE

[venomblue550]

HI, we just finished some chrome intakes and small parts like pulley, tags, fuel rails, brackets.....also due to we are getting crazy busy over here now, everyone's chrome gas cap is on the way back today, we ran out those already chrome ones on the 1st day....i'm very sorry about that, if you have any questions or need price on stuff, PM or e-mail me, we can do just about anything and everything EXCEPT wheels.....due to we are doing all corvette parts now too, so the turn around time is about 5-7 days, thanks.....

 

[1MEANSNAKE]

Cant wait to get my Gas Cap back

 

[Hisserman]

Darn, shucks, -- that intake looks fantastic!!

 

[Daffy Duck Viper]

Just curious. What's the cause of the goldish color in the center section to the left and right sides? Just a reflection of something that can't be seen from the angle the pic was taken? Something else?

You must be registered for see images

You must be registered for see images

You must be registered for see images

 

[Jerry Dobson]

WOW... That looks good.

 

[jimandela]

wow!
it should have come from the factory that way!
wow!

 

[venomblue550]

that's just my camera reflection from our wall paper, it's in tan color, check on that picture shot from the top, you don't see those yellow spots, it's triple chrome plated, thanks

 

[BlueGTS]

Normally when someone says chrome intake they mean chrome intake tubes. Not the entire manifold. That is unbelievable!

 

[IEATVETS]

I would like to get my intake plated but I have been hearing that on some of the gen1 cars, mine is a 94 rt, that the plating flakes after a while because of the material that it is made out of. Any comments about that?

 

[DChan415]

someone got a mighty small chrome paxton pulley in there.

 

[Vipermed 97.01]

someone got a mighty small chrome paxton pulley in there.

 

[SSSSE YA]

Normally when someone says chrome intake they mean chrome intake tubes. Not the entire manifold. That is unbelievable!

 

[venomblue550]

yes, those intake mainfolds are all cast alumium, which takes special stuff to seal it before chrome plate, just like those gas caps, a lots of place try to do this, but the chrome gets extremly hot, so crack the whole gas cap, but we know what we doing, and the stuff we use is SPECIAL, no one else have it, that's why we can handle whatever year viper intake mainfolds no problem at all, plus we plate the whole intake, so the chrome is covered all the way around, so 100% no peeling....., and give us about 2 weeks, we will able to do all valve covers soon, we just got this speical sealer in, will handle those valvecovers, just have to test them......

 

[John Johns]

Looks incredible! What's the cost?

 

[ALsRT10]

Shop location, phone number and if you have one...Website?

 

[venomblue550]

"John Johns" and "ALsRT10"

you both got PM, thanks

 

[2MANYTOYS]

Shop location, phone number and if you have one...Website?

Send me the same info!

 

[Bill B]

I'd like to know also.
Thanks.

 

[Got Venom]

How does the surface get so smooth. Do you have to strip the powder coating paint off first, and then do you have to polish the rough cast surface smooth, to get such a smooth surface, or does the plating go on so thick that it just sort of flows over all rough surfaces to make it look so smooth? If you can do it without stripping and polishing, then the price must be reasonable. I had to pay a guy $750.00 to polish my intake manifold, and that was after it was stripped free by a friend. The guy that polished it said that next time he would charge no less than $1,200 to polish, because it took so long. So how much for this smooth chrome finish?

 

[venomblue550]

everyone got PM, thanks

 

[GoldMan]

I'm curious about the price also.

 

[Bad02ViperGTS]

I would also like to know the price....Also do you offer a core or we have to ship to you first??

 

[FLX109]

Me Too, PM me

 

[Craig 201 MPH]

Looks nice and shiny. Really good job. Not my cup of tea but I'm sure you'll sell lots.

 

[venomblue550]

everyone got PM

 

[ubnbit]

I would like a PM as well.

 

[Simms]

PM please.

 

[2002_Viper_GTS_ACR]

Why not just post the price ? Why all this PM stuff ??

Jon

 

[FE 065]

I'll take a PM too

 

[Hisserman]

PM me too -- thanks.