Ben, after I posted last I took a look under my hood, I
couldn't see where the vacuum line entered the firewall, but
my vacuum line is thin black plastic(unlike most rubber lines)
so it would be easy to see. It snaked down between my heater hoses and I couldn't get a good view. It comes off the intake right above the back end of the passenger valve cover(there is a formed area in the intake where it enters). Since your motor is GEN-II, there will be some difference. I misplaced my manual, but I'll check on the point of entry at
firewall tomorrow if you
have no luck. If your vacuum line is damaged, I think the dealer can
come up with another, since I've seen similar ones on other cars, or you might get lucky and splice it.---------------
Hugh Perkins
96 RT Black/Blue Stripes
<FONT COLOR="#ff0000" SIZE="1" FACE="Verdana, Arial">This message has been edited by HP on 11-30-2002 at 12:25 AM</font>