Latest activity
-
ARight now, I have 15 of the Gen 1 laminated posters available, and 6 of the Detroit racing posters left. They are also listed on the VCA...
-
-
GTS Dean reacted to Goggles Pizano's post in the thread Oil extractor for oil changes gen 2 with
Like.
This is SOP on a lot of newer vehicles. But I still prefer pulling drain plug. Helps if the oil is warmer but I just do it cold on a... -
GGoggles Pizano replied to the thread Oil extractor for oil changes gen 2.This is SOP on a lot of newer vehicles. But I still prefer pulling drain plug. Helps if the oil is warmer but I just do it cold on a...
-
Having one installed this week and curious if the stock handle will work (preferred). Thanks! -
-TRQuixote- reacted to LifeIsGood's post in the thread Where have we landed on side sill/cabin temp resolution? with Like.
I also did this and it made a big difference. I'm cold inside my viper in the Arizona summer. Not so much outside the viper.
-
-TRQuixote- reacted to ViperGTSted's post in the thread Where have we landed on side sill/cabin temp resolution? with Like.
Thanks for the info. Any pictures available of all those mods?
-
-TRQuixote- reacted to white out's post in the thread Where have we landed on side sill/cabin temp resolution? with Like.
Vent the sill: - Cut off the inner fender liner covering the front - Not necessary, but helps with airflow out of car, remove riveted...
-
Aasuj158 replied to the thread DODGE VIPER GEN-2 OEM RADIO AND AMP.What condition are they in?
-
SIts for a 1996-02 GTS and 1997-02 RT/10. I will take $300 delivered.
-
-
LifeIsGood replied to the thread Where have we landed on side sill/cabin temp resolution?.I also did this and it made a big difference. I'm cold inside my viper in the Arizona summer. Not so much outside the viper. -
Good video: https://www.youtube.com/watch?v=5jZ66imTibA -
BoondocSaint reacted to GTS Dean's post in the thread Oil extractor for oil changes gen 2 with Like.
You can rig up your vacuum extractor to use 1/4" tubing and run it down the dipstick tube all the way to the bottom. That setup will... -
GTS Dean replied to the thread Oil extractor for oil changes gen 2.You can rig up your vacuum extractor to use 1/4" tubing and run it down the dipstick tube all the way to the bottom. That setup will...
-
Has anyone used an oil extractor for oil changes? Is this even possible on a gen 2? Trying to figure out how I want to lift this thing... -
Steve M replied to the thread Clunk in the Trunk :).240 ft-lbs is what I've used.
Latest posts
-
-
-
Turning gauge cluster plastics back to white- Latest: Viper Specialty
-
-
-
-
-
-
