Search results
-
F
Should I replace stock cats with hi flows?
Adam: The ACR five point belt definitely takes some getting used to. To answer your question, it only causes sore spots when one uses the standard across the chest belt and sits on the 5 point belt when it is buckled and in the seat. :shocked: But I have learned that if one is very careful...- Frank Barefield
- Post #10
- Forum: RT/10 and GTS Discussions
-
F
Should I replace stock cats with hi flows?
Adam: The ACR five point belt definitely takes some getting used to. To answer your question, it only causes sore spots when one uses the standard across the chest belt and sits on the 5 point belt when it is buckled and in the seat. :shocked: But I have learned that if one is very careful...- Frank Barefield
- Post #9
- Forum: RT/10 and GTS Discussions
-
F
Should I replace stock cats with hi flows?
On my 01 Yellow GTS ACR (1400 miles) I have been told by several sellers of exhaust systems that I should definitely replace the stock cats with Random Tech (stainless not ceramic) hi flow cats to keep the sills from being discolored. I am going to install a borla cat back on this car and would...- Frank Barefield
- Thread
- Replies: 11
- Forum: RT/10 and GTS Discussions
-
F
Keys for 2001 RT/10 back window
We got the window out! :D Since the window was tilted in towards the rear of the seats, we pressed on the bottom of the glass toward the seats with a good bit of pressure and were able to remove the window without unlocking the 2 top locks. After the window had been removed, we were able to...- Frank Barefield
- Post #7
- Forum: RT/10 and GTS Discussions
-
F
Keys for 2001 RT/10 back window
A new 2001 RT/10 owner in Birmingham (TC) cannot get his key to open the back window which, BTW, has been put in backwards by the seller. The key will go into the tumbler but will not turn the tumbler. We have tried pushing in and out on the tumblers, thinking that the latch was wedged into...- Frank Barefield
- Thread
- Replies: 6
- Forum: RT/10 and GTS Discussions
-
F
I got bored and took some pics of my HID 9005 fog light conversion PICS!
Adam: Of course I'm wearing the 5 points (snugged up tight) :p in stop and go traffic. You know how excited I get everytime I get in the YELLOW BEAST. :cool: The 5 point harness keeps me from drawing wood in that baby. ;) I've devised an 8 inch dowel to operate the radio...- Frank Barefield
- Post #17
- Forum: RT/10 and GTS Discussions
-
F
I got bored and took some pics of my HID 9005 fog light conversion PICS!
Adam: Can't you get the front end any lower? You've got at least another inch before it scrapes all the time. :) All you need now is to install two 4 foot shop broom heads on the front facia and you could get an extra job as a street sweeper! :laugh: Seriously, looks great! :2tu: Frank- Frank Barefield
- Post #9
- Forum: RT/10 and GTS Discussions
-
F
Newbie to the forum
Welcome Viper8298. You will find that this board is very informative and anytime you have a problem, there are lots of great Viper owners ready to help you. It is required reading everyday! Glad to have you with us! :headbang:- Frank Barefield
- Post #3
- Forum: RT/10 and GTS Discussions
-
F
How would you get a reprint of the factory build/ window sticker sheet?
Joe-E Bay item # 2471198108. It is a replica that is 8 1/2 x 11 in size . It is laser printed and is based on an original. I ordered one (what the heck) and we'll see how good it is. The proper path to the item is E Bay Motors Manuals and Literature Cars & Trucks Dodge Then insert...- Frank Barefield
- Post #13
- Forum: RT/10 and GTS Discussions
-
F
How would you get a reprint of the factory build/ window sticker sheet?
Hemibeep-Found the guy on e bay and ordered one for a 2001 ACR. They have stickers for lots of cars available. Leaves out the last of the serial #s, but that's ok. Only cost $5.95. Went to Dodge/Books & Manuals/searched for "window sticker" and there it was. Thanks for the lead. Frank- Frank Barefield
- Post #8
- Forum: RT/10 and GTS Discussions
-
F
The Viper Buyer's Guide made me do it
Re: The Viper Buyer\'s Guide made me do it Adam-Mickey (our friend with a twin turbo Liggenfelter C5)wants to know if you are getting the parts you are using for your performance rebuild of your GTS from the yellow corvette. :laugh: Thanks for posting the pics! :2tu:- Frank Barefield
- Post #10
- Forum: RT/10 and GTS Discussions
-
F
Ferrari owners...what's up with them?
Re: Ferrari owners...what\'s up with them? Since most people do not see Vipers very often in Birmingham, I feel it is my duty to wave and be friendly every chance I get. I've even pulled over to the side of the road so someone could look at the car. I want people to get the impression that a...- Frank Barefield
- Post #34
- Forum: RT/10 and GTS Discussions
-
F
How would you get a reprint of the factory build/ window sticker sheet?
Thanks Adam and Sylvan- I saw on Barrett-Jackson a few weeks ago that Chevy can remake the old price and option window stickers, just give them the vin #. Seems strange Dodge doesn't have that capability. :confused: Frank- Frank Barefield
- Post #3
- Forum: RT/10 and GTS Discussions
-
F
The Viper Buyer's Guide made me do it
Re: The Viper Buyer\'s Guide made me do it Thanks Hemi! The subcontractor that did that iron work really is a genius! :headbang: Frank- Frank Barefield
- Post #3
- Forum: RT/10 and GTS Discussions
-
F
The Viper Buyer's Guide made me do it
The Viper Buyer\'s Guide made me do it A couple of years ago I saw a yellow GTS in Tampa and the desire for the color (plus the additional power of the yellow cars) has been smoldering inside me ever since. I had a 97 red GTS before my current 01 RT, but I'd never seen a yellow GTS before...- Frank Barefield
- Thread
- Replies: 15
- Forum: RT/10 and GTS Discussions
-
F
I Found The Answer............
Don-Does this mean you are going to drive your car to Chalkville for the next cruise in? Glad to hear the problem may be fixed! Send me an e mail or call me the next time you are coming to B'ham. :2tu: Frank- Frank Barefield
- Post #3
- Forum: RT/10 and GTS Discussions
-
F
review of AP engineering trunktop (Removable hardtop)
Excellent reply, Jeff. One can never forsee all problems with an invention. It is refreshing to observe someone who doesn't make excuses and does his sincere best to make his customers happy. I'm going to end up buying one of these. Your additude is "TOPS". Hummmmmm............ :2tu:- Frank Barefield
- Post #12
- Forum: RT/10 and GTS Discussions
-
F
Does anyone have Venomblues #
Come on Venomblue, this is exactly what you told me a couple of months ago when my emblems did not arrive as promised. This HAS happened before. I did get the emblems, but it took about 3 weeks from my pay pal payment. I never did get the "first shipment". I am pleased with the emblems, however.- Frank Barefield
- Post #23
- Forum: RT/10 and GTS Discussions
-
F
Garage modified for lift
Beautiful!! Who sells the lift and how much do they cost, and how hard to install? Great job!! Frank :headbang:- Frank Barefield
- Post #27
- Forum: RT/10 and GTS Discussions
-
F
Ala/Tenn Region Cruise in July 17
The Alabama/Tennessee Region Viper Club will meet on July 17 at the Trussville Cruise-in (Birmingham) at 5 pm. The location is at the K mart on Chalkville Mt. Road. From Interstate 59, heading North, take exit 141,(Chalkville Road), turn left and go over the interstate and K Mart is at the 3rd...- Frank Barefield
- Thread
- Replies: 0
- Forum: VCA Viper Events and Gatherings
-
F
Some Insurance Advice?
I am paying State Farm approximately $840 per year in Alabama which includes a $1,000 deductible on collision and $1,000,000 liability. Frank- Frank Barefield
- Post #2
- Forum: RT/10 and GTS Discussions
-
F
I finally finished my side exhaust conversion, what do you think?
looks great! Would love to see a cost breakdown and hear how much trouble it was. :2tu:- Frank Barefield
- Post #7
- Forum: RT/10 and GTS Discussions
-
F
Sick of the rain
I don't enjoy driving the car in the rain because the windows are up, the top is on, one can't hear the exhaust as well and the car is getting road grime on it which must be cleaned off. I also don't think the wipers work especially well. I prefer to keep the car very clean at all times and...- Frank Barefield
- Post #10
- Forum: RT/10 and GTS Discussions
-
F
Guess what! I bought a MIG Welder! Watch out!
Gee Adam, I hope this welder works ok, or I guess we'll be reading a 4 page thread with the manufacturer chiming in.......... :laugh: BTW are you going to use this to adjust your Paxton unsuper supercharger? ;) Frank P. S. Should I tell Mickey to get ready? :2tu:- Frank Barefield
- Post #25
- Forum: RT/10 and GTS Discussions
