-
-
DDan Cragin replied to the thread Another crank no start thread but with a twist.I installed a Viper motor in a 240 and 280z back in the day. A bit of sorting. Reach out if you need advice. The front suspension and...
-
DDan Cragin posted the thread Looking for a pair of Gen 3 exhaust manifolds in General Viper Discussion.Need a pair that are not cracked
-
DGen 5 rear wheel liners (pair) $300 Gen 5 ACRE rear diffuser extension set (new) $350 Gen 2 Cylinder heads (good cores) (pair) $600...
-
DDan Cragin replied to the thread Pre Purchase Inspection for Rebuild Title.Wrong Duluth! Good Luck. Any salvage car needs close inspection. Seen some good ones and really bad ones!
-
DDan Cragin replied to the thread Pre Purchase Inspection for Rebuild Title.You might contact Archer Racing. I think they are out there and are Viper experts.
-
DDan Cragin replied to the thread Looking for OEM PCM File – 1997 Viper 702AE.I'm sure Dan can help you. If not the file can be e-mailed if you have programmer. PM me if needed.
-
DDan Cragin replied to the thread BC Racing DS Coilovers - Anyone Running These?.If you want to go in that direction I would suggest Wil Thorne at Snake Bite Performance. He is a BC and Swift dealer and may work with...
-
DDan Cragin replied to the thread BC Racing DS Coilovers - Anyone Running These?.If you choose the spring rates that are best for your setup, then that is the way to go. The problem is the damping on these shocks is...
-
DDan Cragin replied to the thread Conti ExtremeContact Sport 2 vs Michelin PS 4S.I have had both on my personal GTS, the Conti's most recent. I think the Mich's are stickier, both tires are good and don't time out...
-
DDan Cragin replied to the thread crankshaft.Most crankshafts can be repaired, what is the issue?
-
DDan Cragin replied to the thread Rear differential replacement issues!!.The setup on Viper differentials is a bit of a learned thing, but most good gear shops should be able to setup a rear end to not much...
-
DDan Cragin replied to the thread Service engine soon light on.Just like Dan indicated. You unplugged the air temp sensor when the airbox was removed. It made the light come on. After a few starts...
-
DDan Cragin replied to the thread Supercharging a gen3 question.The Paxton kit is a good system. I developed all the Viper kits in conjunction with Paxton back in the day. The basic package with the...
-
DDan Cragin replied to the thread Gen 2 Yellowbox calibrator.I know a couple people who had a bad yellow box from the get go, might try another.
-
DDan Cragin replied to the thread Gen 2 Yellowbox calibrator.No HP does not support it. If you can find a SCT programmer then we could e-mail you a calibration.
-
-
Loading…
-
Loading…
