FST SNAKE
VCA Venom Member
- Joined
- Last seen
- Posts
- 247
- Reaction score
- 154
Latest activity Postings About
-
-
FST SNAKE replied to the thread The Quest for 275 MPH.We had a bad day on the dyno doing a hit to 7000 RPM, we have an issue with oil pressure. We don't think it's related to any bearing... -
FST SNAKE replied to the thread Gen 4 shifter lever/stick and handle replacement.I am a fan of the old school pistol grip shifters, I just removed the shifter, cut the stock handle and welded on what I wanted. By the...
-
-
FST SNAKE replied to the thread The Quest for 275 MPH.Today I put on all my gear and harness to make sure I could reach all the controls. We will probably move the seat back further and down...
-
-
FST SNAKE replied to the thread The Quest for 275 MPH.The bulkhead is going in now, need that separation between me and all the stuff that burns in the rear hatch area.
-
-
FST SNAKE replied to the thread The Quest for 275 MPH.https://youtube.com/shorts/9r88nOMvRAw?si=xt5YKtmQPvOLeCuH Here is a link to how Blucifer did in the Celebration Exotic Car Show
-
FST SNAKE replied to the thread The Quest for 275 MPH.I do have vertical strakes on the roof and we also plan for the same on the rear between the hatch and quarter panels. I'm also working...
-
FST SNAKE replied to the thread The Quest for 275 MPH.We know the rear is heavier at this point but won't know numbers until we scale it after it's finished. A lot of rear mid engine cars...
-
FST SNAKE replied to the thread The Quest for 275 MPH.We haven't put it on the scales as of yet but it will weigh more than a typical stock Viper. It has a lot of weight added to the rear to...
-
FST SNAKE replied to the thread The Quest for 275 MPH.It has been Jeff, almost 4 years worth to get it to this point. It's been so long since I've driven it and it is no longer the same car...
-
FST SNAKE replied to the thread The Quest for 275 MPH.Here are pictures of the parachutes going back on. These are land speed chutes so 1st pull is smaller chute and longer tether, 2nd pull...
-
-
FST SNAKE replied to the thread The Quest for 275 MPH.We were back on the dyno again but apparently there is a ground issue with either the MoTec or factory pcm. Gearhead is working to...
-
FST SNAKE replied to the thread The Quest for 275 MPH.Here is my helmet for the attempt at 275 MPH, I've had that same decal on a few helmets over the years.
-
-
FST SNAKE replied to the thread Good read..Was a good article, thanks for posting
-
FST SNAKE replied to the thread The Quest for 275 MPH.It seems that the oil leaks at the turbos has been fixed, combination of the pressure regulators and drain tank did the trick. I'm not...
-
FST SNAKE replied to the thread The Quest for 275 MPH.Just a short update on where we are at with Blucifer. Gearhead has had the car on the dyno a few times, ran it thru the gears including...
-
-
Loading…
-
Loading…
