J
Jhalsey
- Posts
- 18
- Reaction score
- 2
Latest activity Postings About
-
-
JJhalsey replied to the thread Another crank no start thread but with a twist.Can you tell me what Scanner will work ? I’ll have to purchase one. Assume I will need a cable that mates to the diagnostic connector.
-
JJhalsey replied to the thread Another crank no start thread but with a twist.Not out of the woods yet, test drive revealed engine behavior that's weird, almost like it was running out of gas, pulls and doesn't...
-
JJhalsey replied to the thread Another crank no start thread but with a twist.Can anyone recommend a particular brand/part number relay for use in the ASD circuit, preferably with a mounting tab. Reliability is...
-
JJhalsey replied to the thread Another crank no start thread but with a twist.So the story has a happy ending, thanks in no small part to Dan and all of you who chimed in. I ended up installing another ASD relay...
-
JJhalsey replied to the thread Another crank no start thread but with a twist.Well, there is no power to the injectors. Checked the fuse and ASD relay, both good. There must be a wiring fault somewhere. More time...
-
JJhalsey replied to the thread Another crank no start thread but with a twist.Is there any potentially useful information to be found on the diagnostic connector? As stated before, the crate motor PCM does not...
-
JJhalsey replied to the thread Another crank no start thread but with a twist.well, no joy after replacing both the crank and cam position sensors. Cranks on and on, no hint of combustion. Accelerator pedal pressed...
-
JJhalsey replied to the thread Another crank no start thread but with a twist.I’m in North Carolina at moment, back wednesday. I now have the new sensors. I will finish inspecting for damage next week. Depending on...
-
JJhalsey replied to the thread Another crank no start thread but with a twist.Dropped the pan which required the exhaust to be dropped and of course the oil and filter. The filter has been relocated for clearance...
-
-
JJhalsey replied to the thread Another crank no start thread but with a twist.Pulled the cam pos sensor and used an endoscope to inspect the area around the mounting hole. No smoking gun but when I dropped the pan...
-
-
JJhalsey replied to the thread Another crank no start thread but with a twist.Because the fuel pump is re-triggered at the end of cranking, Dan @ VSP now feels the CKP sensor is probably ok and now suspects the CMP...
-
JJhalsey replied to the thread Another crank no start thread but with a twist.I’m about a week away from receiving my new CPS. I appreciate your offer to loan me your oscilloscope, lets see if the new sensor cures...
-
-
JJhalsey replied to the thread Another crank no start thread but with a twist.I will post pictures of the engine bay. I replaced the cam position sensor maybe two years ago. The water pump had failed and in the...
-
JJhalsey replied to the thread Another crank no start thread but with a twist.so I checked and have continuity between the ground pins of the CPS, the TPS and ATS (air temp). I also hear the fuel pump run for a...
-
JJhalsey replied to the thread Another crank no start thread but with a twist.Ah, crank and cam positions, thanks for clarifying. With regard to will it start with the gas pedal to the floor, I haven’t tried it. At...
-
-
Loading…
-
Loading…
