Recent content by LarryBRed99GTS
-
L
Smoke after hard stop
Thanks for the info. You happen to know who makes this piece?- LarryBRed99GTS
- Post #3
- Forum: RT/10 and GTS Discussions
-
L
Smoke after hard stop
Recently I had the need to come to a complete hard stop from around 55mph in order to lawfully stop at a traffic light. When I started off again once the light had changed to green, I noticed rather heavy oil smoke as I shifted through 4th. Afterwards, no more smoke. Anyone else heard of...- LarryBRed99GTS
- Thread
- Replies: 3
- Forum: RT/10 and GTS Discussions
-
L
1999 GTS Alignment
Dean, Thanks for the reply. The reason for the alignment was due to my climbing over the curb at about 5mph. I needed an oil change anyway so, as an afterthought, I decided to have the dealer check the alignment. According to what I was told, the toe-in on the right front and right rear was...- LarryBRed99GTS
- Post #6
- Forum: RT/10 and GTS Discussions
-
L
1999 GTS Alignment
I took my '99 GTS to a local dealer here in Roswell (Atlanta), Georgia and was told that the cost for alignment could be as much as $1000.00 but would most likely be around $300.00, and, sure enough that was what the bill was when I picked up my car. I just figured that since the car is...- LarryBRed99GTS
- Thread
- Replies: 16
- Forum: RT/10 and GTS Discussions
-
L
GT2 VIN# Needed
I am looking for oem part #'s for the '98 GT2 front splitter, side sill plates, dive plates, and rear wing. Also, I will need part numbers for the installation hardware. The regional DaimlerChrysler zone manager in my area, who is a friend, is having a problem coming up with these #'s. He...- LarryBRed99GTS
- Thread
- Replies: 3
- Forum: RT/10 and GTS Discussions
-
L
GTS-R Parts
I have a '99 GTS. I would like to determine if the rear spoiler, front bumper ground effects plate (the black plastic chin plate that extends the lower bumper), side sill ground effects plates (the black plastic plate that extends the bottom of the side sills), and dive plates for a GTS-R will...- LarryBRed99GTS
- Post #4
- Forum: RT/10 and GTS Discussions
