Recent content by texasviper
-
T
Gen 1 and Gen 2 Question
Re: the electrical switches on your driver’s door. I suspect the wiring harness between the door and the door jam. Slide the rubber corrugated boot concealing the wiring and check for broken wires. It’s very common problem. I cut my corrugated covering and spliced, soldered in more flexible waiting.- texasviper
- Post #8
- Forum: RT/10 and GTS Discussions
-
T
Gen 1 and Gen 2 Question
Here’s who I used for my 2000 RT-10 window regulator repair…- texasviper
- Post #7
- Forum: RT/10 and GTS Discussions
-
T
Looking for a gen 2 water pump.
99RT10GTS-how much for your rebuilt water pump. Thanks- texasviper
- Post #3
- Forum: RT/10 and GTS Discussions
-
T
Gen2 RT/10 wiring behind dashboard debug difficult?
My car on the driver’s side window did the same thing. There were broken wires in the flexible rubber tube between the door and the door jam. Replaced with more flexible wire and it’s been working for over 10 years.- texasviper
- Post #4
- Forum: RT/10 and GTS Discussions
-
T
P0172 Code
It’s mostly something related to your repairs assuming it was running fine before you started making repairs. I suggest you begin by starting the car. Let it warm up. Then while the engine is warm and running, remove each spark plug wire. Be sure to use insulated gloves and insulated wire...- texasviper
- Post #4
- Forum: RT/10 and GTS Discussions
-
T
MADE A TRUNK KIT FOR THE RT/10 TODAY (PICS)
Did you let the fiberboard rest on the spare tire or did you build some rails for it to rest? Velcor to hold down the carpet?- texasviper
- Post #13
- Forum: RT/10 and GTS Discussions
-
T
SS oil cooler lines
Some pix and tricks of installing SS lines.- texasviper
- Post #5
- Forum: RT/10 and GTS Discussions
-
T
SS oil cooler lines
That's what I thought. It's just a two pass U-tube heat exchanger and the lines are the same diameter. Thanks for the info. I can see why they use braided SS hosing. The hoses had several badly wore spots.- texasviper
- Post #3
- Forum: RT/10 and GTS Discussions
-
T
SS oil cooler lines
Does anyone know if it matters which braided SS lines from oil cooler go which return on filter housing and/or oil pump housing? I had new hoses made because one was leaking. The hose shop may have switched lengths, but not sure. http://www.mopar.com/pdf/viper/00sr.PDF- texasviper
- Thread
- Replies: 4
- Forum: RT/10 and GTS Discussions
-
T
Fuel Filter?
I tried finding a parts manual for your car, but no luck. Here are two other links you might find helpful. http://www.mopar.com/pdf/viper/02sr.PDF http://www.mopar.com/pdf/viper/00sr.PDF- texasviper
- Post #17
- Forum: RT/10 and GTS Discussions
