Search results

  1. S

    very rare viper for sale!

    It's getting to the point where cars not signed by Shelby will bring more money.
  2. S

    Track question, SRT10 coupe vs GTS

    How much improvement did you notice on the 40mm rear caliper upgrade?
  3. S

    High HP on ROE blower

    I like to put some thought into my responses before posting.
  4. S

    High HP on ROE blower

    Nitrous
  5. S

    Whats my 97 B&W GTS worth?

    High 40's.
  6. S

    Any GTS pics with Gen III wheels?

  7. S

    Radiator replacement

    Does yours have the brass drain plug? Daniel Lesser posted a long explanation as to why it would quickly destroy the radiator due to the battery effect between dissimilar metals. I've had mine for almost two years with no leaks although the drain petcock froze in place almost immediately.
  8. S

    Paxton VS. Roe Which is the better for my application?

    The water/methanol IS the intercooler for the Roe system and is both inexpensive and easy to install. My blower inlet tubes are COLD, AFTER a dyno pull. If you run a Roe without W/M, you are missing out big time. As far as controlling low end torque, I use the gas pedal.
  9. S

    Who has an Exhaust trim plate? Opinions?

    jimster, I allocate the trim plates based on the buyers income. I could let you have one for say............ $2000.
  10. S

    Who has an Exhaust trim plate? Opinions?

    Yes, that's the one. BTW, my daughter has Autovation pedals in her Prelude but hers are not the color of her car.
  11. S

    Who has an Exhaust trim plate? Opinions?

    No more than your vented cowl.
  12. S

    Who has an Exhaust trim plate? Opinions?

    Send me your address and I'll send you a polished stainless steel trim plate, no cost to you. I don't like seeing a serviceman getting shorted. :usa:
  13. S

    Has anyone done the the p/s pump bracket yet?

    I did both recently, not a big job but took two people to do it without removing the pump hoses.
  14. S

    And so it starts. Clunking in the back end when I go on and off the gas?

    Re: And so it starts. Clunking in the back end when I go on and off the gas I had a similar issue that turned out to be the wheel bearing hub assembly.
  15. S

    Water Meth, installation question?

    Capacity is a show stopper, wouldn't even try it.
  16. S

    Draining Fluidyne Rad?

    I emailed the Fluidyne tech department and this was their response. "We have been using the brass drain plugs in our aluminum radiators for over 10 years, and have never had a problem. As an example, consider an engine that has brass expansion plugs, that last forever. You should not experience...
  17. S

    Draining Fluidyne Rad?

    Has Fluidyne addressed this problem? How does a company who makes radiators not know about this interaction between metals?
  18. S

    Wanted: H*nn*ss*y Gts Rear Wing

    2manytoys has one for sale, yellow.
  19. S

    P/S Pulley & Roe SC

    I ran a Roe for three years with the stock pulley. Recently changed both the pulley and the bracket that the pump mounts to. Both are known to fail.
  20. S

    New Viper Owner

    Man, you have an excellent memory. What's it been, like three years since you've driven your car?
  21. S

    Roe Blower with Nitrous??

    I have a wet setup with the jets in the wheel sides of the smooth tubes. Water/meth nozzles are plumbed in the inside of the smooth tubes. W/M is a must if you are running the Roe. My nitrous is not controlled by the VEC 2 so I don't have to change programs to run it. I pick up 250 foot...
  22. S

    NEW P/S Pump Bracket Billet

    OK, I just replaced both the bracket and the pulley today. I did not have to disconnect any of the lines to the pump itself as you can lift it clear enough to pull the old pulley and press on the new one. Access to the three mounting bolts is through the holes in the pulley itself.
  23. S

    Anyone recommend a good trailer for the Viper? (track events)

    Based on this thread, I went to the Sloan factory this morning and talked to the owner Dean Sloan. What a great down to earth guy with a high quality product. I ordered a custom quickload that will be ready next Wednesday. When I asked him how much he needed down, he said just pay him when I...
  24. S

    Roe Supercharger Limits

    You are making a MASSIVE amount of torque!
  25. S

    Roe Supercharger Limits

    Is removing the pickles from Belanger headers worth the effort on a Roe car?

Latest posts

Staff online

Members online

Total: 1,057 (members: 9, guests: 1,048)

Forum statistics

Threads
153,839
Posts
1,686,667
Members
18,448
Latest member
JpKL

Share this page

Top